Product Details:
Payment & Shipping Terms:
|
Voltage: | 220V/50HZ | Power: | 2.5KW |
---|---|---|---|
Interior Size: | W 600 × D 450 × H 400 Mm | Temp Uniformity: | ±2.0℃ |
Exterior Material: | Baked Painting Steel | Test Time: | 0—999 H M Can Adjust |
High Light: | salt spray testing machine,salt spray corrosion test chamber |
Intelligent Auto Corrosion Test Chamber Can Monitor In Office KM-F-60C
Corrosion test chamber is specifically designed for materials surface corrosion resistance testing, these
materials are treated in kinds of paint, coating, plating, antirust oil treated, etc.; widely used in metal,
electro, electronic, chemical, automotive, aviation, aerospace, telecommunications and other industries
. Carrying out corrosion testing for the products of materials and coating, in order to analyze and
evaluate the samples’ performance under specific environmental conditions of marine environment. |
|
II,Product Specification
|
|
Voltage |
220V/50HZ
|
Power |
2.5KW
|
Weight |
50KG
|
Interior Size |
W 600 × D 450 × H 400 mm
|
III,Main Technical Parameter
|
|
Lab Temperature Range | 1. RT~+75℃ |
Saturated barrel temperature | 3.RT—70℃ |
Salt water temperature | RT℃~+75℃(Match Lab Temperature ) |
Temperature Uniformly | ≤±2℃ |
Temperature fluctuation | ≤±1℃ |
Test time | 0—999 H,M can adjust |
Settlement |
1-2ml/80cm²/h
|
Spray mode |
cycle, continuous program
|
Defogging |
exhaust mist by air extrusion
|
Sample holder: |
meets the standards rules
|
1,Work environment
|
|
Using the environment temperature | 10℃~ 35℃ |
Using the environment humidity | ≤85% |
IV,Material | ||
1,Chamber | ||
Chamber housing material |
A-level 5mm PVC enhanced rigid plastic plate, the surface smooth, and anti-aging
, corrosion-resistant; |
|
Inner material |
8mm A-level PEEK corrosion-resistant plate .
|
|
Cover material |
The cover is made of 8mm A-level PEEK corrosion-resistant plate resistant sheet,
which is easy to observe when the test sample is tested. The cover and the box are
sealed with water, so as to prevent leakage.
|
|
Heating |
inner sink heating mode, heating up fast, uniform temperature distribution.
|
|
Three-dimensional |
observation reagent replenishment slot and the consumption of salt water at any
time |
|
Design |
Well-designed water storage system for water to ensure the smooth and reliable
operation. |
|
Pressure |
Pressure tank made of SUS316 # stainless steel, the appearance of the electrolytic
treatment, excellent corrosion resistance. |
|
2,Control System | ||
Controller |
The controller uses "TEMI510" touch screen control using imported high-precision
microcomputer man-machine dialogue 5.0 inch LCD smart touch screen controller,
temperature, time, alarm, defogger, spray, and other functions of integrated control
, with dynamic display, beautiful and clear screen, Beautiful, humane design with
platinum material temperature sensor, the overall temperature error of ± 1 ℃ |
|
3,Touch Screen Features
|
||
Control System |
The machine control system uses 5.0 inch LCD touch screen control, beautiful and
clear picture display. |
|
Temp Control |
All digital circuit design, temperature control for the PID automatic calculation, the
temperature is accurate to 0.1 ℃, can be continuous touch 20 million times, The
test function is complete, can achieve continuous, interval, programmable and other
spray options. |
|
Dynamic display |
Work interface dynamic display, the use of man-machine dialogue interface, and a
buzzer alarm prompts working conditions. |
|
Instrument using |
ergonomic design, beautiful appearance, easy to operate.
|
|
Water level |
Whether the laboratory or the pressure tank short of water, will automatically add
the corresponding location of the water level, to ensure continuous, reliable and
safe working. |
|
Laboratory |
When the replenishment of laboratory water level is completed, it will start the delay
replenishment function, automatic water valve will add more 6 to 10 seconds of
water in the laboratory, to prevent frequent consumption of water due to start
electronic valve, a great extension of service life of the electronic valve. |
|
Protection system |
Intelligent over-temperature protection system, when the test chamber or pressure
tank exceeds 5 ℃ of the set temperature, the touch screen will dynamically prompt
, and will automatically cut off the circuit, the heating tube no longer powered. |
|
Time |
With the power-off time memory function, if the instrument suddenly power off or
half-way directly off, the next time the machine restarts, will retain the last test data
and set data, will not cause a waste of test time, for the operator saving a lot of time
and effort. |
|
Nozzle | Precision glass nozzle (PYREX), ensure that no crystallization of the worry in 5000 hours. | |
Over-temperature Protection |
With double over-temperature protection, the touch screen over-temperature
protection, based on the equipment we also installed an EGO (over-temperature
protection device) to ensure that even in the worst case, the machine is still safe
and stable. |
|
Test tank |
Using titanium heating tube, the corrosion resistance performance is 8 to 10 times
more than the stainless steel heating pipe, the steam directly into the laboratory,
heating speed faster, shorter standby time. |
|
Spray tower |
Cone-shaped dispersion, with functions of guiding fog, adjust the fog and even fall
fog and so on |
|
Corrosion Test Chamber |
Compared with the ordinary Corrosion Test Chamber , all the function keys of the
touch screen are integrated on the screen, and the operation is simpler. The
integrated circuit and modular structure are adopted for all the lines, which greatly
reduces the incidence of failure. |
|
Setting Time |
When the time is set, the temperature and water level reaches the set requirements,
will automatically start the spray, no manual duty. |
|
Lock screen function |
Operation interface with a lock screen function, to achieve a person to manage and
operate the model. Prevent other operators from revising or changing the
parameters of the test. |
|
Touch screen |
Brand new third-generation English touch screen waterproof, anti-corrosion effect is
even better. |
|
Temperature sensor | Anti-corrosion platinum resistance PT100Ω / MV. | |
Heating |
use high-speed heating titanium heater.
|
|
Tower spray system |
Tower spray system, high-grade quartz glass for a long time without crystallization,
fog particles are distributed. |
|
Salt fluid collection |
Comply with national standards for the area of 80CM ² funnel and the standard
cylinder. |
|
4,Technical basis | ||
Salt spray test |
NSS
|
|
Lab |
35℃±1℃
|
|
Pressure air tank |
47℃±1℃
|
|
Corrosion tests |
CASS
|
|
Lab |
50℃±1℃
|
|
Pressure air tank |
63℃±1℃
|
|
5,Air supply system | ||
Air supply system |
Air pressure of 1Kg/cm2, in two stages adjustment. Stage A adjustment of 2Kg/cm2, use inlet air filters, with drainage function; Stage B is accurate adjustment of 1Kg/cm2, 1/4 pressure gauge, display precise and accurate. |
|
V,Working principle | ||
Spray method |
1. “Bonute principle”, draw salt water and atomize it, atomization even, no block crystal phenomenon, ensures continuous test. 2. Nozzles are made of tempered glass, you can adjust the amount of spray and spray angle, precise crystals glass nozzle(PYREX), ensure no crystalline block of concern in 4000 hours. 3. Spray volume: 1~2ml/h adjustable (ml/80cm2/h standard test 16-hour average value). Measuring tube using in-line installation, neat appearance, convenient operation and observation, reduce Installation space.
|
|
Heating System | Steam heating mode, temperature rises rapidly to reduce standby time. When the temperature is reached, automatically constant temperature accuracy, low power consumption and titanium heating tube, acid and alkali resistance, long service life. |
Pohotos show
Contact Person: Anna Hu
Tel: +8618098282716