|
Product Details:
Payment & Shipping Terms:
|
| Temperature Range: | -60℃ ～ +120℃ | Temp Deviation: | ≦±2.0℃ |
|---|---|---|---|
| Workspace Volume: | W 1000 × H 1600 × D 2200 Mm | Exterior Size: | W 1910 × H 1900 × D 2980 |
| Humidity Range: | 20～98%RH | Inner Wall Material: | SUS304 # Matte Stainless Steel Plate |
| High Light: | humidity and temperature controlled chamber,temperature test chamber |
||
SUS304 # Matte Stainless Steel Walk - In Humidity Chambers Photovoltaic Modules Testing
Overview
Able to accurately simulate a wide range of complicated natural environments, and is suitable for
reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental
testing equipment and test methods for the basic parameters of electric and electronic products under
the condition of humidity, low temperature, high temperature, and constant heat.
Application
Applicable to environmental adaptability and reliability test in such industrial units as electronics,
electrical appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material,
research institution, inspection and quarantine bureau, university etc..
Specifications
|
IV. Main Technical Parameters (Performance: water-cooled, water temperature at +25 ℃, no load.) |
|
| 1,Temperature | |
| 1.1Temperature range | RT ～ +100℃ |
| 1.2 Temp. Deviation | ≦±2.0℃ |
| 1.3Temp.Fluctuation | ≦±0.5℃ |
| 1.4Temp. Uniformity | ≦±2.0℃ |
| 1.5 Heating rate | From RT to +100°C for approximately 30 minutes at full load POWER OFF |
| 2,Humidity | |
| 2.1 Humidity range | 20～98%RH |
| 2.2Temperature and humidity range |
|
| 2.3Humidity deviation |
±3.0％RH(＞75％RH) ±5.0％RH(≤75％RH) |
| 2.4Humidity Uniformity | ±3.0％RH(no load) |
| 2.5Humidity fluctuation | ±2.0％RH |
|
|
| Temperature and humidity performance measurement comply with related regulation of IEC60068-3 standard; Sensors placed in the air outlet. | |
Product details
Packing and Shipment:
After-sales Service and Training
Charge-free warranty will last for 1 year from the date of equipment acceptance. After the warranty
period, the user will be charged properly. Irregular examination and life-long service are available;
Note: If needed, provide 2 operators for on-site installation and training
Contact Person: Anna Hu
Tel: +8618098282716
