Product Details:
Payment & Shipping Terms:
|
Temp Uniformity: | ±0.5℃(0℃~50℃) | Humidity Range: | 20-98%R.H |
---|---|---|---|
Temp Range: | -20℃ ~ +150℃ | Exterior Material: | Baked Painting Steel Plate Or SUS304 |
Insulation Material: | Rigid Polyurethane Foam And Glass Fiber Wool | Controller: | Programmable LCD Touch Screen |
High Light: | temperature and humidity chamber,humidity and temperature controlled chamber |
36 L Left Open Single Door Temperature Humidity Chamber With LCD Pushbutton Controller
Product Application
Temperature and humidity test chamber is also called temperature and humidity
testing machine, constant temperature and humidity experimental chamber, programmable wet heat
alternating test chamber, or constant temperature machine. The Temperature and humidity test chamber
is used to inspect equipments quality and test performance of materials in various environments,
and all kinds of materials properties of heat resistance, cold resistance, dry resistance and
moisture resistance, which is fit for Electronics, electrical appliances, mobile phones, communications,
meters, vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace and
other products quality inspection.
Product Main Features
1.Material quality of inner box is SUS304 # mirror-face stainless steel imported, and
outer box is steel plate and the paint. Box body is processed shape using CNC
machine tool, its shape is beautiful and fine.
2.Heat preservation material used glass fiber cotton of high-intensity PU foam and
high density, which can avoid unnecessary energy loss.
3.Large glass window design, viewing angle in all directions, hollow electric plating
film and anti-condensation design, built-in lights to facilitate the test sample state of
real-time observation in the course of testing.
4.Large-size LCD display screen, simple operation, easy to edit programs. PID with
automatic calculation function, show failure message .
5.An RS-232 communication interface, matching recorder, strong expandability.
6.with timing contact, and be able to cope with dynamic testing and measure test.
7.The system-wide multi-security protection and power-cut memory.
8.Freezer imported by the French original armored warrior compressor and use
environmental-friendly refrigerant (R134a, R404a, R23).
9.Frozen system uses units or low-temperature dual-loop system design.
10.Use more powerful wing-blower air supply cycle, to avoid any dead end,
temperature and humidity are evenly distributed in the test region.
11.Wind-road cycle adopted the design of blowing side wind and return wind. Wind
pressure and wind speed are in accord with test standards, and make the door
instantaneous temperature and humidity open that is stabilized time soon.
12.Heating, cooling, humidification and dehumidification system is totally unaided to
improve efficiency, reduce testing cost, increase life expectancy and lower failure
rate.
Prouduct Specifications
Chamber | |
Workspace volume | W 300 x H 400 x D 300 MM |
Exterior size |
W 460 x H 780 x D 1022 MM PS: External dimensions excluding protrusions part |
Temperature | |
Temperature range | -20℃ ~ +150℃ |
Temp Deviation | ±2.0℃ |
Temp Constancy | ±0.5℃ |
Temp Uniformity | ±0.5℃(0℃~50℃) |
Ramping and soaking rate |
Heating rate: from -20 ° C to +100 ° C for about 60 min (at no load, ambient temperature +25 ° C) |
Humidity | |
Humidity range | 20%R.H.~98%R.H |
Control range | |
Humidity deviation |
±2.0%RH |
Humidity uniformity | 3.0%RH(no-load) |
Humidity deviation | ±2.0%RH |
Environmental test chamber Standard
GJB150.3 high-temperature testing
GJB150.4 low-temperature testing
GJB150.9 humid testing
GB11158 Technical conditions for high-temperature testing box
GB10589-89 Technical conditions for low-temperature testing box
GB10592-89 Technical conditions for high and low temperature testing box
B/T10586-89 technical conditions for humidity testing chamber
GB/T2423.1-2001 Low-temperature testing methods
GB/T2423.2-2001 High-temperature testing methods
B/T2423.3-93 Testing Method for humidity Test Chamber
GB/T2423.4-93 Alternating hot and humid testing method
GB/T2423.22-2001temperature testing method
IEC60068-2-1.1990 low-temperature testing method
IEC60068-2-2.1974 high-temperature testing method
FAQ
Q:What's the delivery term?
A: It depends on the machines dimensions and weight,also according to customer's requirement. It could be shipped by sea, by air or by air express. Usually, the delivery time is about 15-20 working days after receipt of down payment. If you are in urgent need, we can make special arrangement for you.
Q:What’s the payment term?
A: T/T, L/C and other payment terms could be negotiated.
Q: What's the warranty and after-sales service?
A: We provide free parts warranty for 12 months. Feedback to you within 24 hours and help you to repair your problem controller freely, even it's not from our factory.
Q: Do you accept customization service?
A: Yes, the inner chamber dimensions can be customized as per your specific request.
Product Display
Packaging:
Programmable Climatic Test Chambers are covered with air bubble film before put them into the strong plywood case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, crash-proof, etc.
Contact Person: Anna Hu
Tel: +8618098282716