Product Details:
Payment & Shipping Terms:
|
High Temperature Exposure Temperature Range: | +60℃ ~ +150℃ | Low Temperature Exposure Temperature Range: | -40℃ ~ 0℃ |
---|---|---|---|
Preheating Temperature Up Time: | Normal Temp ~ +180℃ ≦60min | High And Low Temperature Impact Thermostat Time: | ≦30min |
Temp.uniformit: | ±2.0℃ | Power Supply: | AC 3ψ4W 380V 50Hz (R, S, T, N Plus Ground) (voltage Fluctuation ≦ ± 10%) |
High Light: | temperature shock test chamber,environmental testing chambers |
Water cooled condenser single door150L 3-Zone thermal shock test chamber
Applications
The use of low temperature and high temperature thermal storage tank, according to the
need to open the DAMPER, achieve a rapid shock impact; balance temperature control system
(BTC), PID control SSPR, the system heat equal to the amount of heat loss so that can be
long-term stability usage.
Specifications
Main Technical Parameters:(Water Cooled,Water temperature+25℃,no load ) | |
Temperature shock range | High temperature exposure temperature range:+60℃ ~ +150℃ |
Low temperature exposure temperature range:-40℃ ~ 0℃ | |
High temperature preheating chamber temperature range | +60 ~ +180℃ |
Preheating temperature up time | Normal Temp ~ +180℃ ≦60min |
Low temperature storage chamber temperature range | -70℃ ~ 0℃ |
Cooling temperature pull down time | Normal Temp ~ -40℃ ≦40min |
Shock recovery time |
-40℃ ~ +150℃ about 5min (Load 5kg electronic products or car parts) (Sensor placed in the unit outlet) |
High and low temperature impact thermostat time | ≦30min |
Temp.uniformit | ±2.0℃ |
Temp.fluctuation | ±0.5℃ |
Structure | |
Workspace volume | W 600 × H 500 × D 500 mm |
Exterior size | About W 1620 × H 2040 × D 2100 mm (Not contain a prominent part) |
Chamber Structure | Independent product testing area, high temperature heat storage area, low temperature storage area |
Interior material | (SUS 304#) |
Exterior material | Baked painting steel |
Insulation material |
High Temp.chamber:24k Glass fibre wool Low Temp.chamber: PU Foam+Glass fibre wool |
Heater | Bare wire heater |
Air circulation system | a.TECO Motor b.Stainless steel ext c.(SIROCCO FAN) |
Door | Single door, a .Flat embedded handl B. Rear button:SUS 304 C. Silicone foam strip |
Noise | Measured at 1 meter from the machine, the noise is ≦70dB |
Refrigeration System | |
Compressor | German Bock semi-hermetic compressor or German semi-hermetic compressor |
Refrigerant | R404A/R23 ,safe and no ozone damage |
Condenser | Shell and tube condenser ( water cooled ) |
Evaporator | High function fin type auto load adjusting and no frosting during long time operating |
Accessories | High accuracy expansion valves, Oil Separator, drier are all top international brands |
Refrigerant Control | Auto adjust energy output |
Refrigeration Technology |
Nitro protect welding, bi-stage vacuum bump to ensure clean and stable inside the system ※Water collecting plate under compressor, drainage the waters out of the chamber through pipe |
Standards Met and Implemented:
GB/T2423.1.2
GB10592-89
GJB150
Prouduct Display
Packing and Shipment:
Contact Person: Anna Hu
Tel: +8618098282716