Product Details:
Payment & Shipping Terms:
|
High Temp.chamber: | +60 ~ +200℃ | Low Temp.chamber: | -80℃ ~ -10℃ |
---|---|---|---|
Low Temp.chamber Pull Down Time: | From +20℃ ~ -70℃ 60min | High And Low Temperature Shock Constant Temperature: | ≦30min |
Temp.uniformit: | ±2.0℃ | Power Supply: | AC 3ψ4W 380V 50Hz (R, S, T, N Plus Ground) (voltage Fluctuation ≦ ± 10%) |
High Light: | thermal shock chamber,environmental testing chambers |
Bare Wire Heater Thermal Shock Test Chamber , Single Door Thermal Testing Equipment
Applications
The use of low temperature and high temperature thermal storage tank, according to the
need to open the DAMPER, achieve a rapid shock impact; balance temperature control system
(BTC), PID control SSPR, the system heat equal to the amount of heat loss so that can be
long-term stability usage.
Specifications
Main Technical Parameters:(Water Cooled,Water temperature+25℃,no load ) | |
Laboratory temperature range | -65℃ ~ +150℃ |
High Temp.chamber | +60 ~ +200℃ |
High temp.chamber heat up time | From +60℃ ~ +200℃ 20min |
Low Temp.chamber | -80℃ ~ -10℃ |
Low Temp.chamber pull down time | From +20℃ ~ -70℃ 60min |
Shock recovery time |
-65℃ ~ +150℃ about 5min (with load IC 5kg) (Sensor placed in the unit outlet) |
High and low temperature shock constant temperature |
Above 30min |
Temp.uniformit | ±2.0℃ |
Temp.fluctuation | ±0.5℃ |
Structure | |
Workspace volume | W 600 × H 500 × D 500 mm |
Exterior size | About W 1620 × H 2040 × D 2100 mm (Not contain a prominent part) |
Chamber Structure | Independent product testing area, high temperature heat storage area, low temperature storage area |
Interior material | (SUS 304#) |
Exterior material | Baked painting steel |
Insulation material |
High Temp.chamber:24k Glass fibre wool Low Temp.chamber: PU Foam+Glass fibre wool |
Heater | Bare wire heater |
Air circulation system | a.TECO Motor b.Stainless steel ext c.(SIROCCO FAN) |
Door | Single door, a .Flat embedded handl B. Rear button:SUS 304 C. Silicone foam strip |
Refrigeration System | |
Compressor | German Bock semi-hermetic compressor or German semi-hermetic compressor |
Refrigerant | R404A/R23 ,safe and no ozone damage |
Condenser | Shell and tube condenser ( water cooled ) |
Evaporator | High function fin type auto load adjusting and no frosting during long time operating |
Accessories | High accuracy expansion valves, Oil Separator, drier are all top international brands |
Refrigerant Control | Auto adjust energy output |
Refrigeration Technology |
Nitro protect welding, bi-stage vacuum bump to ensure clean and stable inside the system Water collecting plate under compressor, drainage the waters out of the chamber through pipe |
Standards Met and Implemented:
GB/T2423.1.2
GB10592-89
GJB150
Prouduct Display
Packing and Shipment:
Contact Person: Anna Hu
Tel: +8618098282716