|
Product Details:
Payment & Shipping Terms:
|
| Material: | PVC | Temperature Range: | 35±1℃～50±1℃ |
|---|---|---|---|
| Volume: | 108L | Air Compressor: | 1/2 HP |
| Power: | AC 220V 50Hz | Heater: | 3KW+0.75KW |
| Internal Size: | W600 X H400 X D450 Mm | ||
| High Light: | salt spray testing machine,salt spray test equipment |
||
Quick Delivery PVC 108L Salt Spray Test Chamber for Surface Treatment Testing
1. Why Salt Spray is Common and Popular?
2. Application of Salt Spray Testing
Salt water spray test chamber is widely used in Corrosion Resistance Test for products after treated by plating, anodized, spraying, and anti-rust, to test the surface treatment of various materials. Those so-called treatments include coating, electroplating, and films of organic and non-organic materials, anodizing, anti-rest oil and corrosion resistant treatment, which may achieve the purpose of keeping the items from being corroded for a longer period.
3. Specifications:
| Specifications (Note: We reserve the right to change specifications without prior notice) | |||
| Model | HL-160-NS | HL-90-BS | HL-60-SS |
| Interior dimensions(W*H*D)mm | 1600*500*1000 | 900*500*600 | 600*400*450 |
| Exterior dimensions(W*H*D)mm | 2240*1500*1600 | 1460*1280*910 | 1130*1070*630 |
| Volume(L) | 800 | 270 | 108 |
| Heater | 15KW+1KW | 7KW+0.75KW | 3KW+0.75KW |
| Air compressor | 2HP | 1/2HP | 1/2HP |
| Temp. range | 35±1℃～50±1℃ | ||
| Test applicable | NSS, ACSS,CASS,CORK | ||
| Power | AC220V 1Φ 50Hz |
||
4. Features:
A. The whole part of the device is made of P.V.C. Sheet and the inside of the device is reinforced by using a special lining material. Hence, it is sturdily made and will not transform forever.
B. The test chamber is heated from five directions in order to ensure the temperature difference in the chamber may be kept within (± 1℃).
C. Spray nozzle: The nozzle is specially made to enable it to suck up the salt water and then spray it out in the shape of mist with considerable high speed. When it falls on the surface of the item being tested, the difference of fallen mist may be controlled within ± 0.3ml / 80 cm2h.
D. HUNTER PRINCIPLE is used to make the saturated air hot and moist and to keep the humidity in the test chamber required for test.
E. Temperature is the pre-requisite condition that with have direct impact on corrosion rate. We use P.I.D. temperature control unit to limit the temperature difference within the range of ± 0.5℃.
F. A warning device is used to indicate the low level of the test fluid, when the fluid is only enough for being sprayed for five hours, a buzzer will remind the user to replenish the liquid to ensure continuous spray test.
G. Use full automatic detecting system, test stopped automatic, and lighting display when trouble.
3. Additional Features of KOMEG'S Salt Spray Tester
● High temperature resistant material imported from Germany to ensure long-term use
● Complete system for water level and water temperature protection to ensure safe use
● Nozzle spray pressure, work room temperature and working time adjustable, easy operation
● Accurate glass nozzle to assure evenly spread and no crystallization block.
6. Salt Spray Test Chamber System Diagram
7. Combined Cycle Tester System Diagram
8. Packing Info:
PP film First and strong plywood case:
We provide two ways for your choice about packing:
A, Pack up directly, this needn't your more work but a bigger packing size;
B, Packing after tearing down the front drainage outlet and the back stents, then the package size and weight will become less. even you can choose to deliver by air. You just need to install the drainage outlets and stents again, but that's very easy. For example:
Contact Person: Anna Hu
Tel: +8618098282716
