Payment & Shipping Terms:
|Temperature Range::||0℃～65℃||Humidity Sensor:||PT100|
|Instrument Brand:||7-inch Touch Screen Control Instrument||Power Voltage:||380V 50HZ|
|Temperature Fluctuation:||±0.5℃||Heating Up Rate:||3℃≤1min(Can Be According To Customer Requirements )|
Simulation Environmental Testing Equipment Accelerated Ozone Test Chamber For Tires
The content of ozone in the atmosphere is rarely but the main factor of rubber cracking. This product
simulates and strengthens the ozone conditions in the atmosphere, studies the role of ozone on rubber, and
quickly identifies and evaluates the anti-ozone aging properties and anti-ozonant protection of rubber.
|Product Description:||Accelerated Ozone test chamber||Model no||QL-250|
|Working size(Deep*W*H)||630×630×630mm||Exterior size|
|Temperature range:||0℃～65℃||Humidity sensor||PT100|
|Temperature Sensor||PT100||Compressor:||Taikang, France|
|Instrument brand||7-inch touch screen control instrument||Power voltage||380V 50HZ|
The ozone test can do static and dynamic elongation test , and the tensile float is about 5% to 45% of
the test measured sample itself.
The sample holder can rotate 360 degrees. The indoor sample holders, fixtures, and conduits are all made of materials that are not easily decomposed by ozone and that affect the ozone concentration.
|Static and Dynamic Tensile:||
According to test methods and standards can be divided into "static" and
"dynamic", static refers to the sample was tensile after the release of the
test chamber to do the test, the dynamic is to place the sample on the test
chamber fixture, while tensile the side to do the test , The tensile float is
about 5% to 45% of the test measured sample itself
630×630×630(The chamber color can be according to customer
|Heating up rate||
3℃≤1min(Can be according to customer requirements )
|Cooling down rate||
0.7~1.0℃/1min(Can be according to customer requirements )
20~500pphm or 500-1000pphm(optional)
|Feeder rotation speed||
|Test gas flow||
|Power Supply (Approx.)||
|Temperature control accuracy||±0.1℃|
Time: 0.1min, Temperature: 0.1°C, Humidity 0.1% RH
adopts Qingrui TEMI990 control instrument
Main features of the product performance structure
Stainless steel test chamber in line with international standards.
Completely closed gas circuit to make and capture ozone.
The ozone concentration is arbitrarily set in the range of 20 to 500 pphm or
500 to 1000 pphm.
Motor drive lifting and reducing test device
The equipment can realize the adjustment of ozone concentration,
temperature and relative humidity of air flow.
The occurrence and capture of the entire ozone gas is a closed circuit to
ensure personal safety.
Structure performance of Product features:
GB/T7762-2003 Vulcanized rubber or thermoplastic rubber
Ozone crack resistance static tensile test, GB/T2951.21-2008 Cable insulation and sheathing materials
General test method,
GB/T 11206-2009 Rubber Aging test surface cracking method, and other relevant
standards specified test methods.