Payment & Shipping Terms:
|Product Name:||Environment Temperture And Humidity Chamber||Brand:||KOMEG|
|Material:||#304 Stainless Steel||Warranty:||12 Months Free Parts Warranty|
|Temperature Range:||-70℃～+150℃||Humidity Range:||20~98%R.H|
|Compressor:||Danfoss Or Tecumseh||Refrigeration System:||Air Cooled|
climatic test chambers,
Environmental Test Chamber
Environment Temperture and Humidity Chamber KOMEG KMH-408S
Environment Temperture and Humidity Chamber applicable to environmental adaptability and reliability test in such industrial units as electronics, electrical appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research institution, inspection and quarantine bureau, university etc.
The main products in KOMEG include environmental test chamber, thermal shock test chamber, walk-in test chamber, drive-in test chamber, burn-in rooms,aging test chamber, drying ovens, salt spray test chamber and medical laboratory test chamber etc.
Now our products are widely used in some well-known companies,
such as LG, HUAWEI, FOXCONN, , UL NZ, SUZUKI, YUNORI, STC in Hong Kong, and in many universities in China, such as BUAA, PKU, etc.
|Temp. range||-70°C ~150°C|
|Heat up time||-70°C ~+100°C ,within 60 min|
|Pull down time||+20°C ~-70°C , within 80 min|
|Safety device (standard)||NFB, over pressure,over heat and over current protection for compressor, Over temp. protect, over load protect of blower, dry heat protection|
|Interior material||Stainless Steel Plate(SUS 304)|
|Exterior material||Baked Painting Steel Or Stainless steel(SUS304)|
|Insulation material||Rigid polyurethane Foam and Glass Fiber Wool|
|Ambient Temp.||+5°C ~+35°C|
|Wiring method||AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires|
|Controller||LCD Touch Screen, Chinese or English display selectable|
|Operation model :Program or fix point running|
|Memory capacity :120programs,1200steps,|
|All repeat 999 cycles, part repeat 99 cycles|
● Cable Port: Φ100mm cable port is available
● Ro-type water purifier:R-80/day
Provide to keep the humidifying heater and wet bulb wick free from scale.
● Inner glass door with operation port
A glass door can be provided behind the main door so that specimens can be observed. Two operation ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door.
The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (5℃ 5%RH) for electrostatic reliability tests.
● Temperature and humidity recorder
Temperature 1 pen and humidity 1 pen.
Temperature 3 dots and humidity 1 dot.
Temperature 6 dots and humidity 6 dots.
● Defrosting circuit
The chamber automatically detects and melts the frost on the evaporator when operating below 0℃.
● Liquid or infection
In order to rapidly decrease the temperature inside the chamber, a cylinder of liquid can be connected the chamber.
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Contact Person: Peter Zhang