Payment & Shipping Terms:
|Test Weight:||12kg||Interrior Material:||600*500*500mm|
|Exterrior Material:||1640*1890*1830mm||High Temp. Chamber:||+60 Oc~+200 Oc|
|Low Temp. Chamber:||-70 Oc~-10 Oc||Pre-Heat Time:||+60 Oc~+200 Oc Within 20mins|
|Pre-Cold Time:||+20 Oc~-70 Oc Within 60mins||Test Chamber:||-55 Oc~+150 Oc|
|Ambient Temp.:||+5°c~+35°c||Power:||AC380+/-10% 50Hz 3phase4wires+Groud Wires|
thermal shock chamber,
environmental testing chambers
User Friendly Programmable Thermal Shock Test Chamber
Main features of Thermal test chamber:
1. Programmable Controller with RS232C, 7 LCD touch panel control
2. Stainess steel Interior, galvanized steel sheet exterior
3.2PCS stainless steel loading shelves free
4. Multipane viewing window with heater
5. 50mm diameter feed-through port
6. Floor stand with castors.
Main parts imported: Tecumseh, Danfoss, , siginomiya, ALCO, RANCO, etc.
Top-grade raw material insure the reliability performance
Excellent design bring you good user experiences
Brief introduction of User friendly Programmable Thermal Shock Test Chamber:
The equipment is mainly designed according to the national standard and user-defined requirements. It can simulate different environmental conditions, such as heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, which defines the performance of material. By testing the product under different environmental conditions to see whether its performance can meet the intended requirements. It is widely applied in the industries of electronics, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, and other product components and materials
Thermal Shock Test Chamber is used to quickly find the hidden mechanical weaknesses in electronic components when test specimens are exposed to rapid thermal shock condition, and you will not only reduce the premature failures but also increase the reliability of your products when you choose our thermal shock test chamber.
1.3-zone design: High temperature zone, cold temperature zone, and testing zone.
2. The test specimens under test are stationary in the testing zone.
3. Touch-control operation interface for ease of use.
4. Max. 999H and max. 9999 cycles for high or low temperature shock for thermal shock test chamber.
5. Automatic cycling shock or/and manual selective shock are available
6. Water cooled, binary cooling system for quick cooling effect.
Knowledge of theemal shock chamber:
Thermal shock test is a method of environmental testing that subjects a product to alternating extremes of high and low temperatures. Thermal shock testing allows for the observation of changes in product characteristics and failure occurrence caused by different materials and their thermal expansion coefficients. A thermal gradient difference in the different parts of the object expands by different amounts and can cause cracking and failure. KOMEG brand thermal shock and thermal stress chambers have been designed to operate in accordance with reliability programs, quality control, and commercial test programs and military test.
KOMEG offers several configurations of thermal shock chambers capable of meeting a wide variety of testing needs.
Vertical, two zone chamber has hot and cold zones that can be controlled independently.
Horizontal, three zone thermal shock chamber utilizes controlled areas for hot, ambient and cold temperatures.
Double duty thermal shock chambers from KOMEG are designed with hot zones above and below the cold zone and a two compartment product carrier that simultaneously moves products between the hot and cold zones.
Warranty: One year free warranty for whole set machine, lifelong time maintainance.
After-sale service: Feedback within 2 hours after get the call.
Service: OEM service, Design service, Buyer lable service.
Your attention will be highly appreciated.
We supply 7*24 hours service.
|Low Temp. chamber||-70ºC~-10ºC|
|Pre-cooling time||+20ºC~-70ºC ,Within 60 min|
|High Temp. chamber||+60ºC~+200ºC|
|Pre-heating time||+60ºC~+200ºC ,Within 20 min|
|Recovery time||High-Temp Exposure 30 min|
|Low-Temp Exposure 30 min|
|Recovery time within 5 min|
|Safety device||No fuse breaker, over pressureover heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection|
|Standard accessory||Cable port(portΦ50mm)*1, shelves*2|
|Interior material||Stainless steel plate(SUS 304)|
|Exterior material||Baked painting steel or stainless steel(SUS304)|
|Insulation material||Rigid polyurethane Foam+glass fiber wool|
|Refrigeration system||Water Cooled|
|Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23)|
|Controller||Panel:7-inch LCD Touch panel,Chinese or English display selectable|
|Operation model:Program or fix point running|
|Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles.|
|Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit|
|Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV|
|Power||AC 380±10%50Hz ,3 phase 4 wires +Ground Wires|
|Note:1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available|
Contact Person: Anna Hu