|
Product Details:
Payment & Shipping Terms:
|
| High Temp Chamber: | -40 ℃ ~ +150 ℃ | Humidity Range: | 20℃% ～98%℃ RH |
|---|---|---|---|
| Interior Material: | SUS 304 | Exterior Material: | Baked Painting Steel |
| Compressor: | Semi-Hermetic Compressor | Cooling Mode: | Water Cooled |
| High Light: | climatic test chambers,Environmental Test Chamber |
||
Application
Applicable to environmental adaptability and reliability test in such industrial units as electronics, electrical appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research institution, inspection and quarantine bureau, university etc..
Meet Standards
|
GB-2423. 1-89(IEC68-2-1) |
Test A: Low Temperature Test |
|
GB-2423. 2-89(IEC68-2-2) |
Test B: High Temperature Test |
|
GJB360. 8-87(MIL-STD. 202F) |
High Temperature Life Test |
|
GBJl50. 3(MIL-STD-810D) |
High Temperature Test |
|
GJBl50. 4(MIL-STD-810D) |
Low Temperature Test |
Specifications:
|
Workspace volume |
W 700 × IH 750 × ID 800 mm |
|
Exterior size |
W 980 × EH 1936 × ED 1735 mm |
|
Temperature range |
-40 ℃ ~ +150 ℃ |
|
Temp Deviation |
±0.5℃ |
|
Temp Constancy |
±2.0℃ |
|
Temp Uniformity |
±2.0℃ |
|
Ramping and soaking rate |
+20℃↓ -40℃ 1°C/min (no-load) -40℃↑ +40℃ 3°C/min (no-load) |
|
Humidity range |
20%R.H.～98%R.H |
|
Humidity deviation |
±2％RH |
|
Humidity uniformity |
3.0％RH |
Air-conditioning system
|
Control mode |
Forced ventilation loops design, balance temperature & humidity control system (BTHC). |
|
Air conditioning device |
Top-mounted diffuser to ensure uniformity of temperature and humidity Long axis centrifugal fan, evaporators, heaters, humidifiers was installed on air conditioning box |
|
Heating |
Quality nickel-chromium alloy wire electric heaters, Non-contact control mode (SRR). |
|
Cooling |
Sine wave pattern aluminum finned copper tube air heat exchanger (air-cooled) |
|
Water supply |
Inner water supply mode |
|
Compressor |
Tecumseh brand Compressor |
|
Refrigerant |
Environmental friendly, high temperature level refrigerant R404a |
|
Refrigeration Technology |
※ Nitrogen welding, two-stage rotary vane vacuum pump, ensure that the internal cooling system clean and reliable. ※ Water tray located at the bottom of the compressor to ensure condensate water drain through pipe freely at the rear of the chamber |
|
Display |
Temperature and humidity settings (SV) Actual (PV) value can be displayed directly, Execution of the program can display numbers, Paragraphs, remaining time and cycles, running time display, Program editing and graphic curve display, Fixed or program operation status display, 7-inch resistive analog color TFT display screen VGA 16M pixel true color function, 800 × 480 matrix with LED backlight |
|
Resolution |
Temperature: + 0.01 ℃; Humidity: + 0.1%; Time: 1min |
Company introduction:
Since 1990, manufacturers of custom environmental chambers and standard environmental chambers, Specializing in environmental simulation equipment, ess, walk-in, environmental stress screening, altitude chambers, temperature chambers, temperature and humidity chambers, environmental test chamber manufacturers, humidity chambers, humidity simulation, temperature cycling, thermal test chambers, solar panel test chambers, thermal shock, climatic/climate chambers, vibration test chambers, drive-in chambers, laboratory test chambers, environment test rooms.
Photos show
Packing
Contact Person: Anna Hu
Tel: +8618098282716
