Payment & Shipping Terms:
|Material:||Printed Stainless Steel(SUS 304)||Standard:||Internationally Accepted|
|Warranty:||12 Months On Parts (excluding The Damages Caused By The Natural Disasters, Abnormal Power, Improper Operation And Maintenance, Etc)||Payment Terms::||T/T, L/Cnegotiable|
climatic test chambers,
Environmental Test Chamber
Programmble temperature and humidity test cabinet with over temperature protection
1. Do you know KOMEG?
Founded in 1990, as a leading designer and manufacturer of environmental and climatic test chambers. KOMEG has many world class customers in the aerospace, automotive and electronics sectors.
All design and manufacture of our environmental, temperature and climatic-test equipment is carried out at our factory under an ISO 9001quality-management system, and meet standard .
Design Environmental possesses service, manufacture and design temperature-testing chambers, as well as temperature and humidity, climatic or environmental.
Our standard temperature-testing chambers range from 36L bench-top models to floor-standing products, and to larger, customised, floor-standing walk-in or drive-in rooms.
Standard models of environmental testing or climatic-test chambers include bench top and floor-standing ranges, and the temperature-testing chambers – large customised walk-in or drive-in rooms.
Walk-in rooms can be designed for customised applications for steady state-storage applications such as temperature-only or temperature and humidity control. They can also be supplied to provide hypoxic environments for sports-science applications.
|Environmental Temperature and Humidity Chamber|
|Secifications ( at +20ºC room temp. Or+25ºC water temp with empty load)|
|Model||KMH-R series||KMH-L series||KMH-S series|
|Temp. range||-20ºC~150ºC||-40 ºC~+150ºC||-70ºC~+150ºC|
|Heat up time||-20ºC~+100ºC,within 35 min||-40ºC~+100ºC, within 45 min||-70ºC~+100ºC,within 60 min|
|Pull down time||+20ºC~-20ºC, within 45 min||+20ºC~-40ºC , within 60 min||+20ºC~-70ºC,within 80 min|
|Standard accessories||Sight window*1, cable port(portΦ50mm)*1, shelves*2, chamber lamp*1, power cable *2m|
|Safety device (standard)||No fuse breaker, over pressureover heat and over current protection for compressor,|
|Over temp. protect, over load protect of blower, dry heat protection|
|Control System||Balanced Temperature & Humidity Control System|
|Refrigeration system||Air Cooled (Water Cooled Type is option)|
|Hermetic compressor,Single stage refrigeration system|
|Controller||Panel:7-inch LCD Touch panel, Chinese or English display selectable|
|Operation model :Program or fix point running|
|Memory capacity :120programs,1200steps,|
|All repeat 999 cycles, part repeat 99 cycles|
|Interior material||Stainless Steel Plate(SUS 304)|
|Exterior material||Baked Painting Steel Or Stainless steel(SUS304)|
|Insulation material||Rigid polyurethane Foam and Glass Fiber Wool|
|Wiring method||AC 380±10%50Hz ,3 phase 4 wires +Ground Wires|
|Note: 1. We reserve the right to change specifications without prior notice
2. Customized sizes and configurations available
5.5 Test chamber standards
Several standards organizations provide standards and guidance on environmental test chamber construction, temperature control standards, and engineering tolerances.
Institute of Environmental Sciences and Technology
Air Conditioning, Heating and Refrigeration Institute (formerly the American Refrigerant Institute)
American Society of Heating, Refrigerating, and Air-Conditioning Engineers Air conditioning American Society of Heating, Refrigerating, and Air-Conditioning Engineers
Canadian Standards Association
International Organization for Standardization
Contact Person: Fiona