Product Details:
Payment & Shipping Terms:
|
Products Name: | Thermal Shock Test Chamber | Volume: | 966L |
---|---|---|---|
Test. Chamber: | -55 °C~ +150°C | Cool Model: | Water Cooled |
Controller: | LCD Touch Panel | Installation: | Overseas Installation Available |
High Light: | thermal shock chamber,environmental testing chambers |
Powerful Stainless steel 3-Zone Thermal Shock Testing Chamber Automobile Part
Thermal shock testing subjects a product to alternating extremes of high and low temperatures in order to observe changes in the product’s characteristics and failure occurrences caused by different materials and thermal expansion.
KOMEG thermal shock chambers and thermal stress chambers are designed to operate in accordance with reliability programs, quality control, commercial test programs, and military test standards.
Standards Met and Implemented:
GB/T2423.1.2
GB10592-89
GJB150
Specifications:
3 Zone Thermal Shock Test Chamber | ||||||||
Specifications | Note:1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
|||||||
Model | KTS-A Series | |||||||
72A | 100A | 150A | 200A | 252A | 300A | 480A | ||
Interior size | W(mm) | 450 | 500 | 600 | 670 | 700 | 800 | 800 |
H(mm) | 400 | 450 | 500 | 600 | 600 | 600 | 800 | |
D(mm) | 400 | 450 | 500 | 500 | 600 | 650 | 750 | |
Exterior size | W(mm) | 1490 | 1540 | 1640 | 1720 | 1750 | 1850 | 1850 |
H(mm) | 1790 | 1840 | 1890 | 2000 | 2000 | 2000 | 2200 | |
D(mm) | 1600 | 1700 | 1830 | 1850 | 1930 | 1980 | 2500 | |
Test weight(KG) | 5 | 10 | 12 | 15 | 18 | 20 | 20 | |
Low Temp. chamber | -55ºC~-10ºC | |||||||
Pre-heat time | +20ºC~-55ºC ,Within 60 min | |||||||
Test. chamber | -40ºC~+150ºC | |||||||
High Temp. chamber | +60ºC~+200ºC | |||||||
Pre-heat time | +60ºC~+200ºC ,Within 20 min | |||||||
Recovery time | High-Temp Exposure 30 min | |||||||
Low-Temp Exposure 30 min | ||||||||
Recovery time within 5 min | ||||||||
Safety device | No fuse breaker, over pressureover heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection | |||||||
Standard accessory | Cable port(portΦ50mm)*1, shelves*2 | |||||||
Interior material | Stainless steel plate(SUS 304) | |||||||
Exterior material | Baked painting steel or stainless steel(SUS304) | |||||||
Insulation material | Rigid polyurethane Foam+glass fiber wool | |||||||
Refrigeration system | Water Cooled | |||||||
Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23) | ||||||||
Controller | Panel:7-inch LCD Touch panel,Chinese or English display selectable | |||||||
Operation model:Program or fix point running | ||||||||
Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles. | ||||||||
Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit | ||||||||
Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV | ||||||||
Ambient Temp. | +5ºC~+35ºC | |||||||
Power |
AC 380±10%50Hz ,3 phase 4 wires +Ground Wires |
3 Zone Thermal Shock Test Chamber | ||||||||
Specifications | Note:1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | |||||||
Model | KTS-B Series | |||||||
72B | 100B | 150B | 200B | 252B | 300B | 480B | ||
Interior size | W(mm) | 450 | 500 | 600 | 670 | 700 | 800 | 800 |
H(mm) | 400 | 450 | 500 | 600 | 600 | 600 | 800 | |
D(mm) | 400 | 450 | 500 | 500 | 600 | 650 | 750 | |
Exterior size | W(mm) | 1490 | 1540 | 1640 | 1720 | 1750 | 1850 | 1850 |
H(mm) | 1790 | 1840 | 1890 | 2000 | 2000 | 2000 | 2200 | |
D(mm) | 1600 | 1700 | 1830 | 1850 | 1930 | 1980 | 2500 | |
Test weight(KG) | 5 | 10 | 12 | 15 | 18 | 20 | 20 | |
Low Temp. chamber | -70ºC~-10ºC | |||||||
Pre-heat time | +20ºC~-70ºC ,Within 60 min | |||||||
Test. chamber | -55ºC~+150ºC | |||||||
High Temp. chamber | +60ºC~+200ºC | |||||||
Pre-heat time | +60ºC~+200ºC ,Within 20 min | |||||||
Recovery time | High-Temp Exposure 30 min | |||||||
Low-Temp Exposure 30 min | ||||||||
Recovery time within 5 min | ||||||||
Safety device | No fuse breaker, over pressureover heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection | |||||||
Standard accessory | Cable port(portΦ50mm)*1, shelves*2 | |||||||
Interior material | Stainless steel plate(SUS 304) | |||||||
Exterior material | Baked painting steel or stainless steel(SUS304) | |||||||
Insulation material | Rigid polyurethane Foam+glass fiber wool | |||||||
Refrigeration system | Water Cooled | |||||||
Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23) | ||||||||
Controller | Panel:7-inch LCD Touch panel,Chinese or English display selectable | |||||||
Operation model:Program or fix point running | ||||||||
Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles. | ||||||||
Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit | ||||||||
Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV | ||||||||
Ambient Temp. | +5ºC~+35ºC | |||||||
Power | AC 380±10%50Hz ,3 phase 4 wires +Ground Wires |
Features of Different Cooling Mode for thermal shock chambers:
Since the cold chamber need huge cooling capacity for shocking, the chamber’s cooling mode is often designed as air-cooled or water-cooled.
Air-cooled type need installation environment:
The room must be equipped with exhauster and air conditioner to make sure heat dissipation timely.
It’s applied to small power products and cool areas.
Water-cooled type need installation conditions:
The customer must prepare water pipe and water tower (located outside) accordingly.
The water must be pure, or it will block the pipes and result in some maintenance trouble with time going.
It’s often applied to large system with the features of better heat dissipation, longer service time, low noise but slightly higher price if count the fee of water tower and water pipes.
Thermal Shock Test Chamber Features
1.3-zone design: high temperature zone, cold temperature zone, and testing zone.
2.The test specimens under test are stationary in the testing zone.
3.Touch-control operation interface for ease of use.
4.Max.999H and max.9999 cycles for high or low temperature shock for thermal shock test chamber.
5.Automatic cycling shock or/and manual selective shock are available.
6.Water cooled, binary cooling system for quick cooling effect.
7.Japan imported Seamless Welding Machine, especially for copper pipe welding
Packaging:
Climatic thermal shock test chamber are covered with air bubble film before put them into the strong plywoodcase, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, crash-proof, etc.
KOMEG offers several configurations of thermal shock chambers capable of meeting a wide variety of testing needs.
Vertical, two zone chamber has hot and cold zones that can be controlled independently.
Horizontal, three zone thermal shock chamber utilizes controlled areas for hot, ambient and cold temperatures.
Double duty thermal shock chambers from KOMEG are designed with hot zones above and below the cold zone and a two compartment product carrier that simultaneously moves products between the hot and cold zones.
Besides this, we have a lot of other chamber for your reference:
3-zone/ 2-zone Thermal Shock Chamber
Walk-in Constant Temp. And Humidity Chamber
Rapid Temp. Change Chamber
Precise Drying Test Chamber
Temperature/ humidity/ vibration three integrated Chamber
Precise Drying Chamber
Vacuum oven/ no oxidation oven
Air Exchange Type Aging Oven
Burn-in Room
Salt spray Chamber
Two wing Drop Tester
Vibration Testing Machine( mechanical and electromagnetic)
Contact Person: Anna Hu
Tel: +8618098282716