|
Product Details:
Payment & Shipping Terms:
|
| Temp Range: | +15℃ ～ +50℃ | Temp. Deviation: | ±2.0℃ |
|---|---|---|---|
| Humidity Range: | 30～95%RH | Humidity Deviation: | ±3.0％RH（＞75％RH） |
| Load: | 316Ib Steel, Heat 3KW | Interior Size: | W 4600 × H 2590 × D 4300 Mm |
| High Light: | walk in humidity chamber,walk in climatic chamber |
||
Double door 51L walk-in temprature and humidity chamber with lighting device
A KOMEG Walk-In Chamber serves as a test site for large components, assemblies, and finished
products in electrical and electronics, aerospace, batteries and automobiles, etc. KOMEG manufactures
both Static Walk-In Chambers and Dynamic Walk-In Chambers and can be configured as a temperature
chamber or a temperature humidity chamber.
The KMHW-Series walk-in temperature and climate test chambers are especially developed for large test
specimens. Size and design are optimal loading of test specimens. The modular construction and
variability in size and equipment is ideally for specific application.
.
Features
● GB-2423．1-2008 (IEC68-2-1) Test A: Low Temperature Test
● GB-2423．2-2008 (IEC68-2-2) Test B: High Temperature Test
● GJB360. 8-87(MIL-STD. 202F) High Temperature Life Test
● GBJl50. 3(MIL-STD-810D) High Temperature Test
● GJBl50. 4(MIL-STD-810D) Low Temperature Test
● GB2423. 3-93(IEC68-2-3)Test Ca: Constant Heat Test
● GB2423. 4-93(IEC68-2—30)Test Db: Damp Heat Alternative Test
● GJBl50. 9-93(MIL-STD-810D) Damp Heat Test
Specifications
| 1, Temperature | ||
| 1.1 Temp. Range | +7℃ ～ +48℃ | |
| 1.2Temp. Deviation | ±2.0℃ | |
| 1.3Temp. Fluctuation | ±0.3℃ | |
| 1.4Temp. Uniformity | ≦2.0℃ | |
| 1.5Heating time | +7℃ to +48℃ about 30min no load | |
| 1.6Cooling time | +20℃ to +7℃ about 60min no load | |
| 2, Humidity | ||
| 2.1Humidity range | 30～95%RH | |
| 2.2Temp.and humidity range |
|
|
| 2.3Humidity Deviation |
±3.0％RH(＞75％RH) ±5.0％RH(≤75％RH) |
|
| 2.4Humidity Uniformity | ±3.0％RH(no load) | |
| 2.5Humidity Fluctuation | ±2.0％RH | |
| 3.Load | 316Ib steel, heat 3KW | |
| Temperature and humidity performance measurement comply with related regulation of IEC60068-3-5 standard; Sensors placed in the air outlet. | ||
| Ⅴ. Body Structure ( Field installation ) | ||
| 1. Chamber size |
Interior size: W 4600 × H 2590 × D 4300 mm External Size: W 6050 × H 3090 × D 4500 mm (Does not contain the machine protruding part) |
|
| 2.Insulation Chamber |
External material : High-quality carbon steel plate, the surface for electrostatic color spray treatment ；Interior material :SUS304# stainless steel； Insulation material :100mm rigid polyurethane foam + Glass fiber. |
|
| 3. Door | Double door, W(1200+1200)*H2500 mm, window W460*H560mm | |
| 4. Lighting Device | Moisture-proof incandescent lamp *12. | |
| 5.Power distribution control cabinet | Total power circuit breaker, over-temperature protection. | |
| 6.Pressure Equalizations Port |
Test chamber with one pressure equalization port, ensuring the inside and outside pressure balance. |
|
| 7.Control method | Forced circulation ventilation, balance thermostat (BTHC). | |
| 8. Heating | High-quality nickel-chromium alloy wire heater, non-contact control mode (SSR). | |
| 9. Humidification | Stainless steel corrosion-resistant electric evaporative humidification. | |
| 10.Pure water machine | Pure water machine *1 , Please provide with 1 ~ 2kg / cm2 tap water.. | |
| 11.Humidity Sensor | Electronic humidity sensor , No need to replace the damp cloth. | |
| 12. Threading hole | Open a φ100mm hole in the left side of the chamber, also equipped with rubber isolation plug and plastic cover. | |
| 13.Condensate outlet | Equipped with studio condensate and unit condensate drain holes. | |
| 14. Wind speed | Entire chamber wind speed ≦50ft/min. | |
Product details
Packaging:
Chambers are covered with air bubble film before put them into the strong plywoodcase, which not only
has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic,
odorless, moisture corrosion, crash-proof, etc
After-sales Service and Training
Charge-free warranty will last for 1 year from the date of equipment acceptance. After the warranty
period, the user will be charged properly. Irregular examination and life-long service are available;
Note: If needed, provide 2 operators for on-site installation and training
Company introduction:
Since 1990, manufacturers of custom environmental chambers and standard environmental chambers,
Specializing in environmental simulation equipment, ess, walk-in, environmental stress screening, altitude
chambers, temperature chambers, temperature and humidity chambers, environmental test chamber
manufacturers, humidity chambers, humidity simulation, temperature cycling, thermal test chambers, solar
panel test chambers, thermal shock, climatic/climate chambers, vibration test chambers, drive-in
chambers, laboratory test chambers, environment test rooms.
Contact Person: Anna Hu
Tel: +8618098282716
