Product Details:
Payment & Shipping Terms:
|
Net Weight: | Approx. 200kg | Inner Material: | 8mm A Grade PVC Corrosion-resistant Plate |
---|---|---|---|
Exterior Material: | Baked Painting Steel | Power Supply: | 380V, Three Phase, 50Hz |
Specimen Holder: | A Grade PVC Brackets | Laboratory Temperature Range: | +35 ℃ ~ +50 ℃ |
High Light: | IPX3 Rain Spray Test Chamber,IPX4 Rain Spray Test Chamber,IPX5 Waterproof Chamber |
Simulation Rain Spray Testing Chamber IPX3456 Complex Waterproof Test Chamber
Application | |
The destruction of products and materials by natural water (rainwater, seawater, river water, etc.) causes inestimable economic losses every year. The damage caused mainly includes corrosion, discoloration, deformation, strength reduction, swelling, mold, etc., especially electrical products due to short circuit caused by rain. General applications: outdoor lamps, household appliances, auto parts and other electronic and electrical products. Equipment function: The main function of this equipment is to use products such as electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their components to simulate the conditions of rain, splashing, and water spraying on products. Physical and other related properties. After the test, the performance of the product is judged by verification to facilitate product design, improvement, verification, and factory inspection. |
|
Meet standard | |
In accordance with IEC60529: 1989 + A1: 1999 + A2: 2013 "Degrees of protection provided by enclosures (IP Code)", "Enclosure protection level (IP code)" 14.2.1, 14.2.2, 14.2.3, 14.2.4 And the requirements of Figure 3, Figure 4. |
|
Main technical specifications | |
Interior size | L 1700mm× D 1700mm× H1700mm |
Raindrop area | L600× D 600mm* H 40mm |
Exterior size | Approx L2080 X D 4150X H2300MM |
Turntable diameter | ¢ 600mm (can be equipped with ¢ 400mm, ¢ 200mm) |
Maximum load of turntable | 50KG |
Lifting height of turntable | 400-750 mm |
Turntable speed | 1 -5r / min (precision adjustable) |
Turntable rotation mode | Always forward / reverse rotation |
Flow adjustment method | Use a flow meter with an adjustment panel to manually adjust the flow |
Test time | 0-999 min |
Chamber Weight | 450kg |
Accessories |
1pcs Filter element 100pcs test needles |
IPX34 part-technical parameters | |
Swing tube radius size | R800mm (can be equipped with R600mm, R400mm, R200mm) |
R800 swing tube flow | IPX3 = 2.3L / min; IPX4 = 3.5L / min |
Water jet aperture size | 0.4mm |
Water jet aperture spacing | 50mm |
Swing tube inner diameter | 15mm |
Swing tube angle | 120º (IPX3), 350º (IPX4) or custom setting |
Swing speed of swing tube | 240 ° back and forth 4S, 720° back and forth 12S (precision control) or customized |
IPX56 part-technical parameters | |
IPX5 water jet aperture | 6.3mm |
IPX6 water jet aperture | 12.5mm |
IPX5 water spray flow | 12.5 ± 0.625L / min |
IPX6 water spray flow | 100 ± 5L / min |
Water pressure (Mpa) | Regulate water flow |
Water spray distance | 2.5 meters |
Spray gun swing mode | Swing up and down (angle, speed adjustable) |
Structure Feature | |
1. Suitable for IPX3, IPX4, IPX5, IPX6 waterproof level test of products. 2. The shell is made of domestic high-quality steel plate, and the surface is spray-painted, which is beautiful and durable. 3. The inner box, turntable, and swing tube are made of SUS304 # stainless steel plate to ensure that it will not rust for a long time. 4. Box-type structure; with its own water tank for circulating water; the water tank is equipped with a water level floating ball valve, which automatically controls the water inlet and has a low water level alarm detection. 5. There is a transparent observation window (tempered glass material) on the door, and LED lighting is installed in the box, which is convenient to observe the internal test situation. 6. IPX34: The swing tube drive uses a domestic high-quality servo stepper motor. The swing speed and angle of the swing tube can be adjusted accurately. There is no out-of-step problem. ) 7, IPX56: according to IEC60529 specifications (as shown below):
8. Filtration measures: Standard high-precision filters can effectively filter impurities in tap water; the filter element can be replaced regularly. 9. Turntable drive: Using domestic high-quality stepping motor, the speed and angle can be set (adjustable) on the touch screen, precise and steplessly adjustable within the standard range, and can automatically control forward and reverse rotation (forward and reverse: (Suitable for energized test with sample to prevent winding)). 10. The test box is equipped with a sample power socket (AC220, 10A). The on and off time of the sample power can be controlled by the program: power failure (0-999min)-power on (0-999min)-power failure (0-999min), suitable for samples The test needs to be powered on and off. 11. The test time can be set on the touch screen, and the setting range is: 0-999min (adjustable). 12. The core control system uses 7-inch touch screen + Panasonic PLC, electrical components are imported brands such as LS, Omron, etc. The wiring process meets national standards, the layout of the electrical board is reasonable, the wiring is firm, and the labeling is clear. |
|
Test condition | |
6.1 Place of storage requirements |
without direct sunlight, near the non-flammable, explosive materials, non-corrosive items or other sources of pollution; no strong magnetic interference; well ventilated but can not have strong wind blowing; Rear side, left and right side, top of the device: 800mm Front side of equipment: 1400mm |
6.2 Test products | test products require non-flammable and explosive materials, corrosive and radioactive substances; |
6.3 Environmental conditions |
Temperature: 5 C ~ 35 C Air pressure:86kPa~106kPa |
6.4 Environmental humidity | ≤85%R.H |
6.5 Power | AC3800V±10% ;50Hz±10% ; |
6.6 Protective ground wire ground resistance | 4Ω |
6..7 Power switch |
1. Customer required to configure the equipment with a leakage current protective air switch of the corresponding capacity at the installation site, and this switch must be used independently for this equipment 2.It is prohibited to use the switch or power socket. 3.The location of the leakage protection air switch not more than 2 meters from the device |
6.8 Water source conditions |
1. The user is required to configure a water source for the equipment at the installation site, the water pressure is not lower than 0.2Mpa, and install a DN15 water tap. 2.The faucet is not more than 2 meters from the equipment |
Photos show
OEM and ODM are welcome , more information , pls kindly contact :anna@komegtech.com
Contact Person: KOMEG
Tel: +86-13143135835