Payment & Shipping Terms:
|Usage:||Temperature Change Test Chamber / Ozone Test Chamber||Insulation Material:||Rigid Polyurethane Foam And Glass Fiber Wool|
|Cooling Mode:||Water Cooled||Heater:||Iron-chrome Wire Heater|
|Controllor:||Touch Screen Programmable Controller||Temperature Range:||-40 °C To 150 °C|
|Material:||SUS304 Stainless Steel||Power Supply:||AC 380V±10％ 50Hz ,3 Phase 4 Wires +Ground Wires|
|Exterior Material:||Baked Painting Steel||Workspace Volume (W X H X D):||1000*1000*1000mm|
Xenon Light Fastness Environmental Test Chamber , Resistant Climate Test Chamber
Xenon arc lamp test chamber is a comprehensive climate testing machine, it can do climatic aging test, and also can do fading acceleration test under color effect or color changed. The test range including: dying and finishing, printing, leather, plastic, ply glass, painting, textile, printing ink, rubber and also the industry relative color. Light fastness and fade grade can be known in short time. Those materials exposed at simulated sunlight to evaluated the material’s light fastness performance. To simulate and strengthen the test according to light energy, temperature, rain fall or condensation, humidity, .etc these main climate factors. Adopt simulated sunlight spectrum’s Xenon arc light to create destructive waves under different environment. It can be used for choosing new materials, improving existing materials, or assessment of durability change after material composed.
1. Advanced design technology and concept.
2. EXcellent technology of producing and outstanding system of quality management.
3. Xenon lamp tester can be the most realistic simulated solar spectrum, including
ultraviolet,visible and infrared.
4. Be tested in the range of the full spectrum, necessary for most textile sun and color fastness test.
5. To determine the color fastness and aging to sunlight, weather resistance, etc.
Equipment meets standard GB/T16422.2-1999,GB/T2423.24-1995,SAEJ1885,SAEJ19960,ISO4892-2,AATCC,JASOM,ASTM and so on
|Chamber material Interior material||Interior material :304 stainless steel ；Exterior material :High - grade stainless steel plate or A3 steel plate color dusting treatment|
|Sample holder||stainless steel frame and the fixed position of the sample is adjustable|
|Chamber structure||By the test box, heating / humidification / light / rain / condensation / cooling system and electrical control cabinet|
|Chamber Door||Single door on the left, the door is equipped with anti-UV windows to observe the internal test conditions, the door tightly sealed by the silicone rubber|
|Optical filter||Quartz glass filter: The spectral cutoff of the irradiance on the sample is similar to the value of the daylight on the ground|
|Controller||1. Display: 7-inch color touch screen display;
2. Operating language: English display;
2. Operating mode: program run (dark, light cycle mode) or set value operation ;
3. Operating items: temperature and humidity settings, over-temperature settings, run time settings, spray time (spray, stop spraying cycle) set the operation, the irradiation intensity adjustment, temperature and humidity control curve monitoring, operating condition monitoring , Alarm function monitoring
4. Alarm protection: over-temperature, compressor overload, xenon lamp overheating, water tank lack of water, humidifier anti-dry and so on. When each fault occurs, the display shows the cause of the machine failure and troubleshooting and start the linkage protection function;
5. Data storage: USB data U disk export.
|Inside the box cooling device||Cooling by a French Tecumseh fully enclosed compressor, the cooling air through the upper air circulation under the air circulation duct system and the heat balance reached. The system uses dynamic temperature balance adjustment, at the same time rely on intelligent PID automatic calculation, making the temperature in accordance with the precise setting changes|
|Rain system||Equipment, rain system by the pump, the system program intelligent time control, nozzles and other components, spray cycle adjustable|
|Radioactivity||Built-in sun eye, automatic adjustment of irradiance to meet various standard test needs|
|Temperature range of blackboard||35～100℃ (adjustable)|
|Humidity range||40%R.H～95%R.H (adjustable)|
Being a first-class supplier and reliable partner, we are certified to ISO 9001 and got CE approval for all our products. All equipment are 7 x 24 hours tested before delivery. That explains why Komeg is the private brand of choice for many well-known brand enterprises, and also one of the very few designated suppliers who were recognized by many top 500 enterprises. Let Komeg's 27years of professional experience work for you too.
1. Dedicate touch and excellent user experience
2. Unique and compact design, top grade appearance, stable performance and easy operation
3. Can simulate a wide range of temperature and humidity environments
4. Capable of testing large components, assemblies and finished products
5. Customized sizes and configurations available
6. One year warranties
Besides this, we have a lot of other chamber for your reference:
3-zone/ 2-zone Thermal Shock Chamber
Walk-in Constant Temp. And Humidity Chamber
Rapid Temp. Change Chamber
Precise Drying Test Chamber
Temperature/ humidity/ vibration three integrated Chamber
Precise Drying Chamber
Vacuum oven/ no oxidation oven
Air Exchange Type Aging Oven
Salt spray Chamber
Vibration Testing Machine( mechanical and electromagnetic)
Q1: What is the Warranty for the accelerated aging machine ?
A1: For the accelerated aging machine, we offer 1 years warranty service. If any quality problems on our side occured in this period ,we will send you replacement and cover the cost of shipping and component parts.
Q2: What's the delivery term?
A2: Usually, it takes us 20 - 25 days after order confirmation to produce the equipment and a little bit longer for customization service. While if you are in urgent need, we can make special arrangement to speed up the proceedings. Then we start the shipped by sea, by air freight or by air express.
Q3:What’s the payment term?
A3: T/T, L/C and other payment terms could be negotiated.
Q4:Is it ok for customization service?
A4: Yes, the inner chamber dimensions, structure, color, some special parameters can be customized as per your specific request.