Payment & Shipping Terms:
|Heat Up Time:||-70℃～+150℃||Working Volume:||150L,225L,408L,1000L|
|Humidity Range:||20～98％R.H||Controller:||LED Touch Screen|
|Compressor:||Bock||Wiring Method:||AC 380±10％ 50Hz ,3 Phase 4 Wires +Ground Wires|
|COLD MODE:||AIR COOLED||MATERIAL:||Stainless Steel|
environmental test cabinet,
environmental testing chamber
Space-Saving Stainless Steel Climatic Chamber for PCB Industry
KOMEG environmental Chambers expose products to a variety of temperatures and humidity levels, offering a complete and comprehensive way to improve product reliability.
KOMEG environmental Chambers provide accurate and reliable test results. With more standard features and better performance capabilities than comparable chambers on the market
KOMEG environmental Chambers improve products through dynamic testing solutions.
|Environmental Temperature and Humidity Chamber|
|Secifications ( at +20°C room temp. Or+25°C water temp with empty load)|
|Temp. range||-70 °C ~+150°C|
|Humidity Range||20 ~ 98&R.H.|
|Humidity uniformity||±3.0%R.H||±5.0 % R.H|
|Heat up time||-70°C ~ +100°C , within 60 min|
|Pull down time||+20°C ~ -70°C , within 80 min|
|Ambient Temp.||5ºC ~+35ºC|
|Standard accessories||Sight window*1, cable port(port 50mm)*1, shelves*2, chamber lamp*1, power cable *2m|
|Safety device (standard)||No fuse breaker, over pressure over heat and over current protection for compressor,|
|Over temp. protect, over load protect of blower, dry heat protection|
|Control System||Balanced Temperature & Humidity Control System|
|Refrigeration system||Air Cooled (Water Cooled Type is option)|
|Hermetic compressor,Cascsde Refrigeration|
|Controller||Panel:7-inch LCD Touch panel, Chinese or English display selectable|
|Operation model :Program or fix point running|
|Memory capacity :120programs,1200steps,|
|All repeat 999 cycles, part repeat 99 cycles|
|Interior material||Stainless Steel Plate ( SUS 304 )|
|Exterior material||Baked Painting Steel Or Stainless steel(SUS304)|
|Insulation material||Rigid polyurethane Foam and Glass Fiber Wool|
|System||Balanced & Humidity Control System|
|Wiring method||AC 380±10 % 50Hz ,3 phase 4 wires +Ground Wires|
|Note: 1. We reserve the right to change specifications without prior notice
2. Customized sizes and configurations available
KOMEG Environmental test chambers can simulate most any climate for safe and reliable product testing. The temperature range can be from -70 to 150 °C humidity range can be from 20-98%
Standards Implemented and met
●GB10592-89 Technical requirements for high and low temperature test chamber
●GB2423.1-1989 Low temperature test mode
●GB2423.2-1989 High temperature test mode
●GJB150.3-1986 High temperature test mode
●GJB150.4-1986 Low temperature test mode
●GJB150.9-1986 Warm test method
●Stainless steel exterior
●Energy-efficient refrigeration with exclusive electronic expansion valve system
●Specialized humidity generation and control
●Unique thermal break construction for extreme testing
●Sight window*1, cable port(portΦ50mm)*1, shelves*2, chamber lamp*1, power cable *2m
●No fuse breaker, over pressure,over heat and over current protection for compressor, Over temperature protection, over load protect of blower, dry heat protection
●Cable Port: Φ100mm cable port is available
●Ro-type water purifier:R-80/day
Provide to keep the humidifying heater and wet bulb wick free from scale.
●Inner glass door with operation port
A glass door can be provided behind the main door so that specimens can be observed. Two operation ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door.
The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (5℃ 5%RH) for electrostatic reliability tests.
●Temperature and humidity recorder
Temperature 1 pen and humidity 1 pen.
Temperature 3 dots and humidity 1 dot.
Temperature 6 dots and humidity 6 dots.
The chamber automatically detects and melts the frost on the evaporator when operating below 0℃.
●Liquid or infection
In order to rapidly decrease the temperature inside the chamber, a cylinder of liquid can be connected the chamber
F. Energy-saving operation, the KM-5166 controller uses advanced control of an electronic expansion valve to save energy and improve control of the refrigeration system. Improvements in refrigeration and heater operation make the new generation of KOMEG environmental test chambers the most energy efficient ever.
Interior material: Stainless Steel Plate SUS304#
Exterior material: Baked Painting Steel Plate or Stainless Steel SUS304#
Insulation material: Rigid polyurethane Foam and Glass Fiber Wool
Hermetic compressor, stag refrigeration system
Some environmental test chamber details
Part of the certificate for KOMEG test chamber
Why Choose KOMEG?
Being a first-class supplier and reliable partner, we are certified to ISO 9001 and got CE approval for all our products. All equipment are 7 x 24 hours tested before delivery. That explains why Komeg is the private brand of choice for many well-known brand enterprises, and also one of the very few designated suppliers who were recognized by many top 500 enterprises. Let Komeg's 26 years of professional experience work for you too.
Contact Person: Peter Zhang