Payment & Shipping Terms:
|Work Space Volume:||300 X400 X300mm||Standard And Customized:||Customized|
|Warranty:||15 Months||Compressor:||Danfoss Or Tecumseh|
|Temperature Range:||-40 ～ 150 ℃||Refrigeration System:||Air Cooled|
|Exterior Material:||Baked Painting Steel Or Stainless Steel(SUS304)||Package:||Plywood|
|Controller:||Touch Screen||Power:||220V OR 380V|
environmental test equipment,
environmental testing chamber
KMH-36L Compact Stainless Steel Mini Bench-top Environmental Test Chamber
Benchtop Environmental Test Chamber Applicable to environmental adaptability and reliability test in such industrial units as electronics, electrical appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research institution, inspection and quarantine bureau, university etc.
1) The ideal simulation test chamber for all heat and cold testing between -40 ºC and 180 ºC temperature range
2) Well-suited for reliability testing based on current test standards in the temperature range of -40 °C to 180 °C and 10% to 98% R.H.
3) Meet all requirements for extreme testing and low temperature alternating climate profiles from -70 °C - 180 °C with humidity
● Sight window*1, cable port(portΦ50mm)*1, shelves*2, chamber lamp*1, power cable *2m
● No fuse breaker, over pressure,over heat and over current protection for compressor,
Over temperature protection, over load protect of blower, dry heat protection
● Cable Port: Φ100mm cable port is available
● Ro-type water purifier:R-80/day
Provide to keep the humidifying heater and wet bulb wick free from scale.
● Inner glass door with operation port
A glass door can be provided behind the main door so that specimens can be observed. Two operation ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door.
The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (5℃ 5%RH) for electrostatic reliability tests.
● Temperature and humidity recorder
Temperature 1 pen and humidity 1 pen.
Temperature 3 dots and humidity 1 dot.
Temperature 6 dots and humidity 6 dots.
● Defrosting circuit
The chamber automatically detects and melts the frost on the evaporator when operating below 0℃.
● Liquid or infection
In order to rapidly decrease the temperature inside the chamber, a cylinder of liquid can be connected the chamber.
Standards Implemented and met
● GB-2423．1-89(IEC68-2-1)Test A:Low Temperature Test
● GB-2423．2-89(IEC68-2-2)Test B:High Temperature Test
● GJB360．8-87(MIL-STD．202F) High Temperature Life Test
● GBJl50．3(MIL-STD-810D) High Temperature Test
● GJBl50．4(MIL-STD-810D) Low Temperature Test
● GB2423．3-93(IEC68-2-3)Test Ca:Constant Heat Test
● GB2423．4-93(IEC68-2—30)Test Db:Damp Heat Alternative Test
● GJBl50．9-93(MIL-STD-810D) Damp Heat Test
|36L chamber volume|
|Temp. range||-40°C ～150°C|
|Temperature stability||High±0.5°C ,low ±1.0°C|
|Heat up time||-40°C ～+100°C,within 45 min|
|Pull down time||+20°C ～-40°C,within 60 min|
|Humidity range||20～98％R.H,(standard), '10～98％R.H,(with humidifier)|
|Interior material||Stainless Steel Plate(SUS 304)|
|Exterior material||Baked Painting Steel Or Stainless steel(SUS304)|
|Insulation material||Rigid polyurethane Foam and Glass Fiber Wool|
|Total power||4.5KW(heater 3KW included)|
|Ambient Temp.||+5°C ～+35°C|
|Power Supply||AC 380V±10％ 50Hz ,3 phase 4 wires +Ground Wires|
|Sight window size||430*530mm|
|Sample holder||2 pcs|
|Fittings||cable port(portΦ50mm)*1, chamber lamp*1, power cable *2m|
|Safety device (standard)||
No fuse breaker,over pressure,over heat&over current protect,over temp.
|Control System||Balanced Temperature & Humidity Control (BTHC)System|
|Refrigeration system||Air Cooled (Water Cooled is option)|
Single stage refrigeration system,
7-inch LCD Touch Screen panel
|Operation model :Program or fix point running|
|Memory capacity :120programs,1200steps,|
|All repeat 999 cycles, part repeat 99 cycles|
Note: 1. We reserve the right to change specifications without prior notice
Programmable Climatic Test Chambers are covered with air bubble film before put them into the strong plywoodcase, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, crash-proof, etc.
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Distance from the wall to both sides and rear of chamber more than 800mm, to the front more than 1500mm. Provide independent power distribution switchgear and humidification condensate drains, and external power connector device is necessary
Ground level, well-ventilated , non- flammable, explosive, corrosive gases and dust
No strong electromagnetic radiation nearby
With floor drain ( less than 2 meters from the refrigeration unit )
Venue floor load capacity : not less than800kg/m2
Leave adequate space for maintenance
Why Choose KOMEG?
Over 26 Years' Experience
Komeg has been the brand of Komeg Technology Industrial since 1990. We manufacture environmental simulation test equipment for quality-conscious customers. Our factory is located in Dongguan, covering an area of 5,000 square meters, with over 52 employees including 26 R&D engineers.
Contact Person: Peter Zhang