Payment & Shipping Terms:
|Product Name:||Repid Temp Change Chamber||Application:||Reliability Testing, Research & Development Testing, Failure Analysis|
|Power Source:||AC380V||Cooling Mode:||Water Cooled|
|Heater:||Iron-chrome Wire Heater||Controllor:||Touch Screen Programmable Controllor|
Environmental Stress Screening Chambers,
environmental testing chambers
Water Cooled 5184L high rapid ESS chamber / temperature change climatic test chamber
Fast Temperature Change Test Chamber is used to test various types of materials for their tolerances of
heat, cold, dry, humidity. It is applied for quality inspection for all types of electronic products, electric
appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical,
building materials, medical and aerospace industries.
1. Automatic adding water function, and automatic filling water upon the water short storage while testing.
2.Automatic operation to test process finished, easy to use.
3.Temperature control: LED digital temperature controller can make accurate testing of temperature
setting, control and display.
4.LED digital timer, when the inner box's temperature reached the setting value, then start to time to
ensure the test complete.
5.Accurate pressure: temperature chart always shows the inner box's pressure and relative humidity.
6.Water device is automatically discharge not saturated steam in order to achieve the best steam quality.
7.A integrated silica gel door gasket, air tightness is very good, and long operation life.
8.The inner box is mirror-polished , graceful and non-pollution.
|Performance||Temp.range||-40℃ ～ +150℃|
|Rapid Temp Chang||Rapid Temp Change+80℃～-40℃
Full Linear Control 3℃/min,Rapid Temp Change-40℃～+80℃
Full Linear Control 3℃/min,
|Temp.regulating methods||BTC methods|
|Material Science||Interior material||Stainless Steel (SUS304)|
|Exterior material||Baked Painting Steel Or Stainless steel(SUS304)|
|Insulation material||Rigid polyurethane Foam|
|Refrigeration system||Refrigerator||cascade refrigeration system|
|Cooling Mode||Water Cooled|
|Heater||Iron-chrome wire heater|
|Door window||Glass incorporating heat generator|
|Temp sensor||Pt-100 Platinum resistance|
|Controller||Touch Screen Programmable Controller|
|Safety device||Over protection,over-heat,over-current protection for compressor,over-temperature protection,over-load protection for blower,hydraulic and lack of water protection,leakage protection|
|Standard configuration||Observation window,Cable port,(Ø50mm,1piece for both left and right side),baffle(2sets),chamber lamp|
|Select accessories||RS-232C,recorder,special cable port,special specimen holder,additional baffle|
|Power||AC 380V/50HZ 3phase4wires+Ground wires|
Standards Implemented and Met
1. Manufacturing standard :
GB/T10586-2006 Specifications for damp heat chambers
GB/T10592-1989 Specification for low/high temperature test chambers
2. Inspection Standard :
GB/T5170.2-1996 Inspection methods for basic parameters of environmental testing equipments for
electric and electronic products. Temperature testing equipments;
GB/T5170.5-1996 Inspection on methods for basic parameters of environmental testing equipments for
electric and electronic products--Damp heat testing equipments
If you face any problems in future during testing process we promise we will give you a reply within 48
hours and solution provide within 3 working days. We can offer operation video and English operation
muanual. We can provide video-conference. If customers require on-site service, the transport and travel
expense shall be borne by customer.
Contact Person: Peter Zhang