Product Details:
Payment & Shipping Terms:
|
Cable Port: | Φ50mm*1 Located On Each Side Of Chamber, With Rubber Stopper And Stainless Steel Cover | Humidity Uniformity: | 3.0%RH (no-load) |
---|---|---|---|
Interior Material: | SUS 304 | Ramping And Soaking Rate: | Heating Up Rate: -20℃↑ +100℃ About 35min (no-load, Ambient Temperature +25℃) Cooling Rate: 20 ℃to -20℃ About 45min (no-load, Ambient Temperature +25℃) |
Humidity Deviation: | ±3.0%RH(>75%RH) ±5.0%RH(≤75%RH) | Cooling Mode: | Water Cooled |
High Light: | high temperature test chamber,low temperature test chamber |
High Altitude Simulation Test Chambers are used in different industries like the instruments and meters, electrical products, materials, spare parts, equipment, etc, but mainly in aviation, aerospace, information, electronics and other industries. This machine can be operated at a low pressure, high temperature, low temperature, under the effect of single factor or multiple conditions at the same time. Simulation of high-altitude conditions like might be found in mountainous regions. Test for electric performance parameters of the specimen.
Feathers
● GB-2423.1-2008 (IEC68-2-1)Test A: Low Temperature Test
● GB-2423.2-2008(IEC68-2-2)Test B: High Temperature Test
● GJB360.8-2009(MIL-STD.202F) High Temperature Life Test
● GJBl50.3-2009(MIL-STD-810D) High Temperature Test
● GJBl50.4-2009 (MIL-STD-810D) Low Temperature Test
● GB2423.3-2008(IEC68-2-3)Test Ca: Constant Heat Test
● GB2423.4-2008(IEC68-2—30) Test Db: Damp Heat Alternative Test
● GJBl50.9-2009 (MIL-STD-810D) Damp Heat Test
Specification
Ambient temperature: | 5 ºC ~ 35 ºC; Atmospheric pressure: 86-106kPa |
Temperature range | -70 ~170ºC |
Temp Deviation | ≦ ± 2.0℃ |
Temp Fluctuation | ±0.5℃ |
Ramping and soaking rate | Heating up rate: -40℃↑ +100℃ about 45min (no-load, ambient temperature +25℃) |
Humidity range | Humidity: ≤90% RH |
Humidity deviation | |
Humidity uniformity | 3.0%RH (no-load) |
Humidity fluctuation | ±2.0%RH |
Humidifier | Water basin heating and humidification method; |
Cooling System
Working mode | Mechanical compression refrigeration |
Compressor | Europe and the United States imported hermetic compressor |
Refrigerant | Environmental-friendly refrigerant: R404A |
Condenser | Shell and Tube condenser(air -cooled) |
Ambient temp. and humidity | 5 ~ 35℃ |
Evaporator | Fin-type multi-stage automatic load capacity adjustment, No frost in long-term use of low temperature and humidity conditions |
Other accessories | Use internationally-known brand, such as high precise expansion valve, oil extractor, dryer and many other accessories. |
Refrigerant flow control | Adjust energy consumption output and control automatically to the refrigeration system. |
Refrigeration Technology | ※ Nitrogen welding, two-stage rotary vane vacuum pump, ensure that the internal cooling system clean and reliable. |
Pre-set function | Boot time can be set freely and machine runs automatically when turning on power |
Controllor | TFT Touch Screen Controller with PID control |
Display function | Temp.& humidity Setting (SV) Practical (PV) value can be displayed directly Program editing and graphic curve display, |
Display resolution | Temperature: + 0.01℃; Humidity: + 0.1%; Time: 0.01min. |
Operating mode | Programmable running, constant running |
Program Capacity | Set the running time up to 999999 h 59 m (can also be set to continuous operation without time limit); |
Interface | Can be connected to the computer display curve, data acquisition; |
USB function | 1G-32G available for downloading historical curve and data, control system parameters, pluggable |
KOMEG brand of temperature and humidity test chamber is the ideal simulation test chamber for all heat and cold testing between -40 ºC and 180 ºC temperature range. Well-suited for reliability testing based on current test standards in the temperature range of -40 °C to 150 °C and 10% to 98% RH.Meet all requirements for extreme testing and low temperature alternating climate profiles from -70 °C - 150 °C with humidity.
Photos show
Contact Person: Anna Hu
Tel: +8618098282716