Payment & Shipping Terms:
|Workspace Volume:||IW 450 × IH500 × ID 450 Mm||Exterior Size:||EW 1110 × EH 800 × ED 1100 Mm|
|Temp Range:||+50℃～300℃||Control Precision:||±0.5% ( Full Range)|
|Air Supply Mode:||Forced Air Circulation||Control Mode:||PID+SSR Output|
laboratory drying oven,
vacuum drying oven
Easy operation high reliability stainless steel 210L industrial drying ovens
Able to accurately simulate a wide range of complicated natural environments, and is suitable for
reliability test in industrial products. Meet GB518.104.22.168.6-95 standard requirements of environmental
testing equipment and test methods for the basic parameters of electric and electronic products under
the condition of humidity, low temperature, high temperature, and constant heat.
Applicable to environmental adaptability and reliability test in such industrial units as electronics, electrical
appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research
institution, inspection and quarantine bureau, university etc..
|1Workspace volume||IW 450 × IH500 × ID 450 mm|
|Exterior size||EW 1110 × EH 800 × ED 1100 mm|
|Control precision||±0.5% ( full range)|
|Heat up rate||1.0～5.0℃/min (adjustable)|
Overall structure and chamber was composed of three parts as below.
Insulation box, separate refrigeration units, and electrical control cabinet.
wall material: high-quality carbon steel with static color spray
inner wall material: SUS304 # matte stainless steel plate
Insulation materials: Rigid polyurethane foam insulation layer + glass fiber.
|Door||Heating wire was installed at the door frames to prevent condensation at low temperatures.|
|Cable port||Φ100mm*2 located on both sides, with rubber stopper and plastic cover.|
|Sample holder||Two layers of stainless steel sample holder, bearing (uniform) 50 kg/layer.|
|Mobile Casters||Mobile Casters *4 (with foot cups)|
|Electric control box||Total power circuit breaker, over-temperature protection.|
|Control mode||Forced ventilation loops design, balance temperature & humidity control system (BTHC).|
|Air supply mode||Forced air circulation|
Imported microcomputer automatic calculus controller
4 digit LED display
AUTO TURNING controller
ALARM or TIMER selection
Slope control available
SWITCHING POWER 85-265V AC
|Control mode||PID+SSR output|
|Timer||Control appliance timer function|
Sample test terminal
The power Leak detector
Standards Met and Implemented:
GB-2423．2-89(IEC68-2-2)Test B: High Temperature Test
GJB360．8-87(MIL-STD．202F) High Temperature Life Test
GBJl50．3(MIL-STD-810D) High Temperature Test
Each set protected with resin fiber and PP film, then put into strong wooden
case with operation mannual and video inside.
Product After-sale service
If you face any problems in future during testing process we promise we will
give you a reply within 48 hours and solution provide within 3 working days. We
can offer operation video and English operation muanual. We can provide
video-conference. If customers require on-site service, the transport and travel
expense shall be borne by customer.
Contact Person: Anna Hu