Payment & Shipping Terms:
|Workspace Volume (W X H X D):||700*750*800mm 408 Liter||Temperature Range:||-20 °C To 150 °C|
|Material:||SUS304 Stainless Steel||Application:||Battery Testing|
|Controllor:||Touch Screen Controller||Exterior Material:||Baked Painting Steel|
high temperature test chamber,
low temperature test chamber
High and Low Temperature & Explosion Proof Testing Chamber for Battery
1. KOMEG Explosion Proof Test Chambers give the maximum durability and performance for your most demanding battery test requirements. Built in safety features will prevent the chamber from causing any sparking to protect your products and ensure operator safety.
High and Low Temperature & Explosion Proof Testing Chamber for Battery simulate the temperature variation in the atmospheric environment. Mainly for electrical, electronic products, and its components and other materials in the high-temperature, low-temperature comprehensive environment transport, use the adaptability test. For product design, improvement, identification and testing and so on.
Specifications for Climatic Test Chambers:
Standard Met and Implemented:
GB/Bb T2423.2-89 high temperature test method
GB2423.1-89 test A: low temperature test method 6
GJB150.4-1986 test at low temperature
IEC60068-2-1 low temperature test method
IEC60068-2-38 temperature cycle
IEC60068-2-78 constant humidity temperature
MIL - STD - 202G - 103B humidity test
IEC60068-2-30 humidity temperature cycle
GB/T2423.3 constant humidity heat test method
2. High temperature limits of test chambers
Lithium battery special explosion-proof environmental chamber:
1. Energy-saving design: Intelligent automatic conversion of the expansion system, according to the load automatically adjusts the flow of refrigerant + intelligent electric power data value (%) matches the lifting temperature (load) automatic analog output power data output value. This design can save power than the traditional design More than 30%.
2. Water-saving design: Built-in automatic water recovery cycle device, equipped with high-efficiency water filter. Reduce the consumption of 2/3 humidification water, add more than 170 hours of water at a time, reduce the cumbersome and frequent addition of water.
3. Anti-frosting design: The evaporator cooling circuit is used for multiple time division and the thermal energy of the system's K-tube is used for defrosting. This design can meet the requirements of continuous and uninterrupted low temperature test for more than 30 days without interruption due to frost formation. .
4. Remote monitoring and alarm design: Standard RS-232 and RS-485 communication interface devices can be connected and controlled at the same time with the computer (PC). All Chinese online software is provided. Alerts can be sent automatically when a machine fault alarm occurs. E- Mail to all related personnel (unlimited quantities). This design enables remote management of laboratory equipment.
Safety explosion-proof design: complete equipment safety protection design, test product safety protection design and operator safety protection design, can guarantee the safety of equipment use.
3. Parameter Specifications:
Explosion Proof Chambers can provide the following combination of controlled testing environments:
Steady state temperature and temperature/humidity tests
Cycling temperature/humidity tests
Temperature ranges from -70C to +150C
Humidity ranges from 10-95%RH
|1 Temperature range||-40℃ ～ +150℃|
|2 Temp Deviation||≦ ± 2.0℃|
|3 Temp Fluctuation||±0.5℃|
|4 Temp Uniformity||±2.0℃|
|5 Ramping and soaking rate||
Heating up rate: -40℃↑ +100℃ about 45min (no-load, ambient temperature +25℃)
Cooling rate: 20 ℃to -40℃ about 60min (no-load, ambient temperature +25℃)
|The temperature performance test is based on the relevant regulations of the IEC60068-3 standard; the sensor is placed at the outlet of the unit|
4. Factory Tour --- Why KOMEG IS Your Right Choice?
Specialized in climatic test chamber since 1990
Main parts are imported famouse brand like Tecumseh, Danfoss, Bizter, ESK,Ranco,Castel,etc.
Passed ,CE,TUV,etc. third party certification
Recognized by Global 500 Enterprises like EMERSON, SIEMENS, Minolta, Epson, HUAWEI, TCL,etc
Environmental friendly, low energy consumption and easy maintenance
High cost-effective and steady delivery time
Experienced and trained staffs assure good service
We use PP Film wrapping the test chamber to protect the test chamber from moisture or being scratched first, then use strong plywood case for easyload and transport, and to keep the chambers from potential crash or impact.
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Better Idea, Design and Quality
We strive for continuous innovation, releasing no less than five new designs each year. Our strong R&D team and skilled workers is the key to our success. No matter it is standard or custom-made project, we have rich experience in handling such so that customers worldwide can benefit more when working with us. And to ensure your specific test standards are met, the key components and parts we are using are imported famous brands. That's why , Konica Minolta, Senko, Midea, TCL and Huawei are among our long-term clients.
Contact Person: Peter Zhang