|
Product Details:
Payment & Shipping Terms:
|
| Products Name: | Burn-in Chamber | Interior Dimensions(W*H*D) Mm: | 1500*1280*550 |
|---|---|---|---|
| Exterior Dimensions(W*H*D) Mm: | 1720*1980*750 | Temp. Range: | Room Temp. +20～+100℃ |
| Temp. Uniformity: | ±3℃ | Temp. Constancy: | ±0.5℃ |
| Power: | AC 380±10%50Hz ,3 Phase 4 Wires +Ground Wires | Controller: | LCD Touch Panel |
| High Light: | climatic test chambers,uv aging test chamber |
||
Professional high quality burn-in room used for long-term steady-state evaluation testing
Aging testing chamber/equipments (burn-in room/ chamber)
Suitable for semi-finished & finished products test and cull failure parts. Promote the quality and reliability of products.
The machine can promote the increase of sulfur rubber deterioration, to calculate the change rate of tensile and elongation before and after heat. It’s generally thought that test for one day at 70°C, in theory as exposed to the atmosphere for 6 months.
Anti-yellowing: this machine stimulates the atmosphere environment, driven by the sun ultraviolet radiation. It’s generally thought that the appearance change at 50°C for 9 hours, in theory as exposed to atmosphere for 6 months.
Specifications:
| Specifications | |
| Interior dimensions(W*H*D) mm | 1500*1280*550 |
| Exterior dimensions(W*H*D) mm | 1720*1980*750 |
| Temp. range | Room Temp. +20～+100℃ |
| Temp. constancy | ±0.5℃ |
| Temp. uniformity | ±3℃ |
| Test. capacity | 88PCS/CYCLE(Custom made available) |
| Dimension | 100W*100HJ*50D(MM) |
| Test range | FAN(full machines number) |
| Voltage range | 3～50V |
| Current range | ±5% |
| Speed | 0-15000RPM,±8% |
| The detection speed | 7-12sec/cycle |
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
|
Features
1) Imported large LCD display Chinese/English microcomputer controller.
2) Flexible able to handle most device types.
3) Modular construction enables easy maintenance.
5) Adopt intelligent PID + SST/SCR is reverse the two way synchronization output, including the slope of the advanced control logic.
Structure characteristics
1.Equipment structure takes up stainless steel plate plus (41090) power for hull painting. It not only has good profile, but also has fine corrosion resistance.
2.It utilizes imported closed and durable structure and is endurable and can greatly enhance service property and life of the equipment; it takes up advanced energy save water by 20%, and it uses HFC refrigerant that will not harm human body and nature, you can conduct test in safe way;
3.It has advanced and innovative control theory, it integrates three control systems of PLC, HMI and SOC in fine way. Control is correct by 100%, and you can experience the novel control feeling;
4.It utilizes Fuji touch powerful and reliable PLC and special modules in the industry circle. 50 pr steps are provided for user to make setting/storage and running;
5.It utilizes protection module for safe voltage, the withstand voltage can reach 500V. After energizing the equipment, the equipment will not be burned and it can protect th 100%.
6.It takes up high-sense Fast AIT monitoring and refrigerating system imported and achieves effective control and management for refrigerant volume;
7.It utilizes the advanced USB storage device in the industry. It is the only one fo interface for storing data. It has not only large storage capacity and fast transmission rate, but also is portable, has great supporting property and is convenient.;
8.It can separately raise temperature, reduce temperature, humidify and unique BTHC flat constant temperature and humidity regulating mode;
9.The radio tele-monitoring system takes up IPC/SCADA architecture LAN network interface, it can connect to more than 200 equipments at the same time, and it can a and eliminate the regional limit;
10.It has unique air supply and circulating system, which can avoid dead angle of air flow in the chamber and improve the uniformity degree of product temperature and humidity.
Packaging:
Climatic thermal shock test chamber are covered with air bubble film before put them into the strong plywoodcase, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, crash-proof, etc.
Why Choose KOMEG?
KOMEG is a well-established Environmental testing equipment company, with over 26 years’ experience in developing, and building a range of specialized Instruments. These include climatic test chambers, thermal shock test chambers, walk-in chambers, burn-in rooms,aging test chambers, drying ovens, salt spray testers and medical laboratory equipment etc.
Contact Person: Anna Hu
Tel: +8618098282716
