|
Product Details:
Payment & Shipping Terms:
|
| Products Name: | Burn-in Chamber | Interior Dimensions(W*H*D) Mm: | 1500*1280*550 |
|---|---|---|---|
| Exterior Dimensions(W*H*D) Mm: | 1720*1980*750 | Temp. Range: | Room Temp. +20～+100℃ |
| Temp. Uniformity: | ±3℃ | Temp. Constancy: | ±0.5℃ |
| Power: | AC 380±10%50Hz ,3 Phase 4 Wires +Ground Wires | Voltage Range: | 3～50V |
| High Light: | climatic test chambers,uv aging test chamber |
||
Programmable temperature and Humidity Control heat soaking burn-in chamber
Application
Suitable for all kinds of electronic products,expecially for products with heating characteristics
Product and loading area should be separated
Large-scale production
Specifications:
| Specifications | |
| Interior dimensions(W*H*D) mm | 1500*1280*550 |
| Exterior dimensions(W*H*D) mm | 1720*1980*750 |
| Temp. range | Room Temp. +20～+100℃ |
| Temp. constancy | ±0.5℃ |
| Temp. uniformity | ±3℃ |
| Test. capacity | 88PCS/CYCLE(Custom made available) |
| Dimension | 100W*100HJ*50D(MM) |
| Test range | FAN(full machines number) |
| Voltage range | 3～50V |
| Current range | ±5% |
| Speed | 0-15000RPM,±8% |
| The detection speed | 7-12sec/cycle |
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
|
Features
1) Imported large LCD display Chinese/English microcomputer controller.
2) Flexible able to handle most device types.
3) Modular construction enables easy maintenance.
5) Adopt intelligent PID + SST/SCR is reverse the two way synchronization output, including the slope of the advanced control logic.
Structure characteristics
1.Equipment structure takes up stainless steel plate plus (41090) power for hull painting. It not only has good profile, but also has fine corrosion resistance.
2.It utilizes imported closed and durable structure and is endurable and can greatly enhance service property and life of the equipment; it takes up advanced energy save water by 20%, and it uses HFC refrigerant that will not harm human body and nature, you can conduct test in safe way;
3.It has advanced and innovative control theory, it integrates three control systems of PLC, HMI and SOC in fine way. Control is correct by 100%, and you can experience the novel control feeling;
4.It utilizes Fuji touch powerful and reliable PLC and special modules in the industry circle. 50 pr steps are provided for user to make setting/storage and running;
5.It utilizes protection module for safe voltage, the withstand voltage can reach 500V. After energizing the equipment, the equipment will not be burned and it can protect th 100%.
6.It takes up high-sense Fast AIT monitoring and refrigerating system imported and achieves effective control and management for refrigerant volume;
7.It utilizes the advanced USB storage device in the industry. It is the only one fo interface for storing data. It has not only large storage capacity and fast transmission rate, but also is portable, has great supporting property and is convenient.;
8.It can separately raise temperature, reduce temperature, humidify and unique BTHC flat constant temperature and humidity regulating mode;
9.The radio tele-monitoring system takes up IPC/SCADA architecture LAN network interface, it can connect to more than 200 equipments at the same time, and it can a and eliminate the regional limit;
10.It has unique air supply and circulating system, which can avoid dead angle of air flow in the chamber and improve the uniformity degree of product temperature and humidity.
Packaging:
Climatic thermal shock test chamber are covered with air bubble film before put them into the strong plywoodcase, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, crash-proof, etc.
After-Sales Service
* If you face any problems in future during testing process, we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video, English operation muanual and video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Why Choose KOMEG?
KOMEG is a well-established Environmental testing equipment company, with over 26 years’ experience in developing, and building a range of specialized Instruments. These include climatic test chambers, thermal shock test chambers, walk-in chambers, burn-in rooms,aging test chambers, drying ovens, salt spray testers and medical laboratory equipment etc.
Contact Person: Anna Hu
Tel: +8618098282716
