Payment & Shipping Terms:
|Interior Dimensions:||1600 X 500 X 1000 (W*H*D)mm||Testspace Volume(L):||800|
|Test Applicable:||NSS, ACSS,CASS,CORK||Air Compressor:||2 HP|
salt spray testing machine,
salt spray test equipment
High Quality PVC plates Material Saline Camera for Salt Spray Corrosion Testing
1. Salt Water Spray Tester's Application
Salt Spray Corrosion Test Chamber Evaluate the resistance to salt spray corrosion of products by evaluating the resistance to salt spray corrosion of materials and protective layer and comparing the technique and quality with that of similar protective layer; this product is used in salt spray corrosion test of protective layer of parts, electronic elements, and metal materials and industrial products.
3. Laboratory interior
1) Spray tower: Concealed glass spray-head placed inside the spray pipe, and disperse into the laboratory through the conical disperser.
2) Spray regulator: Regulate the quantity of the mist spray, increase when turn up, reduce when turn down. Salt water pro-warmer tank places under the spray tower, the salt-water supplied from the supplement bottle, and the water level control by the floating ball automatically, the cleaning outlet placed under the tank, which is control by the silicon rubber plug.
3) Shelf: The shelf is made of rubber, the concentration is limited no more than 2 kg weight, and the distribution is no more than 10kg, there are two rows round hold on the both side of the shelf ,it serve for the stick in 30 and 60 degree referred to the vertical plane.
4) Filter: It’s used for filter the impurity in the salt water, net packed filter.
5)Heat sink: The sink placed under the laboratory, it used for heating the water to keep the stable temperature in the laboratory. It has the function of heating, heat preservation, and humidity preservation.
4. Main Technical Index:
|Specifications (Note: We reserve the right to change specifications without prior notice)|
|Interior dimensions(W*H*D)mm||1600 X 500 X 1000||1200 X 500 X 800||900 X 500 X 600||600 X 400 X 450|
|Exterior dimensions(W*H*D)mm||2240 X 1500 X 1600||1410 X 1280 X 880||1460 X 1280 X 910||1130 X 1070 X 630|
|Salt Water Tank Volume (L)||60||40||25||15|
|Temp. range (Testing barrel)||35±1℃～50±1℃|
|Temp. range (Pressure barrel)||47±1℃～63±1℃|
|Test applicable||NSS, ACSS,CASS,CORK|
|Pressed Air Pressure||1.00±0.01kgf/cm²|
|Spray Amount||1.0~2.0ml/80cm²/h(Collect at least 16 hours, take the average)|
|Ambient Relative Humidity||More than 85%R.H.|
|PH Value||6.5~7.2 3.0~3.2|
|Spraying Manner||Programmable Spraying|
|Power||AC220V 1Φ 50Hz|
Unique and exquisite▪ highly corrosion resistant ▪ easy to monitor
The entire chamber structure is made of imported reinforced hard PVC plates with smooth and flat surface, and is aging resistant, corrosion proof, and easy to clean without leakage, avoiding the disadvantage of color fading with time of GRP.
made of imported transparent impact-resistant plates, facilitating to observe status of test specimens during test.
User friendly design ▪ performing tests systematically
made of imported PVC plates with ultra-large size, prevent test from stopping due to shortage of salt water.
All pipes in the test chamber introduce thickening fluorine and silicone rubber tube without aging and cracking within 15 years.
General purpose machine ▪ powerful functionalities ▪ easy to reprogram
Available test methods:Neutral salt spray test (NSS test),Salt spray test (SS test),Acetic acid salt spray test (ASS test),Copper accelerated instinct test,High-temperature humid heat test
6. About the Corrossion Tolerance Testing Chamber
Contact Person: Peter Zhang