Payment & Shipping Terms:
|Humidity Range:||20～98％R.H||Controller:||LED Touch Screen|
|Working Volume:||1500L||Temperature Uniformity:||±2.0º C (with Empty Load)|
|Compressor:||Danfoss Or Tecumseh Or Bock||Wiring Method:||AC 380±10％ 50Hz ,3 Phase 4 Wires +Ground Wires|
|Temperature Fluctuation:||±0.2C||Temperature Uniformity:||±1.5C|
|Humidity Resolution:||0.1%RH||Humidity Fluctuation:||±0.5%RH|
led light testing equipment,
led testing instruments
Programmable LED Light Temperature Humidity Test Equipment Environmental Chamber
Product description :
It can simulate different environment condition,It's appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define perform-ance of material.
Test material heat, cold, dry resistance, humidity resistance.Suitable for electronics, electrical appliances,communications, instrumentation, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace and other products.
|1500L chamber volume|
|Temp. range||-40°C ～150°C|
|Temperature stability||High±0.5°C ,low ±1.0°C|
|Heat up time||-40°C ～+100°C,within 45 min|
|Pull down time||+20°C ～-40°C,within 60 min|
|Interior Dimension(mm)||W 1500 × D 1000 × H 1000 mm|
|Exterior Dimension(mm)||About: W2010 x D1510 x H 2150 mm|
|Interior material||Stainless Steel Plate ( SUS 304)|
|Exterior material||Baked Painting Steel Or Stainless steel ( SUS304)|
|Insulation material||Rigid polyurethane Foam and Glass Fiber Wool|
|Total power||7KW(heater 3KW included)|
|Ambient Temp.||+5°C ～+35°C|
|Power Supply||AC 380V±10％ 50Hz ,3 phase 4 wires +Ground Wires|
|Sight window size||430 X 530mm|
|Sample holder||2 pcs|
|Fittings||cable port(portΦ50mm)*1, chamber lamp*1, power cable *2m|
|Safety device (standard)||No fuse breaker,over pressure,over heat&over current protect,over temp.|
|protect, over load protect for blower, dry heat protect|
|Control System||Balanced Temperature & Humidity Control (BTHC)System|
|Refrigeration system||Air Cooled (Water Cooled is option)|
|Single stage refrigeration system,|
|Controller||7-inch LCD Touch Screen panel|
|Operation model :Program or fix point running|
|Memory capacity :120programs,1200steps,|
|All repeat 999 cycles, part repeat 99 cycles|
1. We reserve the right to change specifications without prior notice
Standards Implemented and met :
●GB10592-89 Technical requirements for high and low temperature test chamber
●GB2423.1-1989 Low temperature test mode
●GB2423.2-1989 High temperature test mode
●GJB150.3-1986 High temperature test mode
●GJB150.4-1986 Low temperature test mode
●GJB150.9-1986 Warm test method
Standard configuration :
●Stainless steel exterior
●Energy-efficient refrigeration with exclusive electronic expansion valve system
●Specialized humidity generation and control
●Unique thermal break construction for extreme testing
●Sight window*1, cable port(portΦ50mm)*1, shelves*2, chamber lamp*1, power cable *2m
●No fuse breaker, over pressure,over heat and over current protection for compressor, Over temperature protection, over load protect of blower, dry heat protection
Optional accessories :
●Cable Port: Φ100mm cable port is available
●Ro-type water purifier:R-80/day
Provide to keep the humidifying heater and wet bulb wick free from scale.
●Inner glass door with operation port
A glass door can be provided behind the main door so that specimens can be observed. Two operation ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door.
The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (5℃ 5%RH) for electrostatic reliability tests.
●Temperature and humidity recorder
Temperature 1 pen and humidity 1 pen.
Temperature 3 dots and humidity 1 dot.
Temperature 6 dots and humidity 6 dots.
The chamber automatically detects and melts the frost on the evaporator when operating below 0℃.
●Liquid or infection
In order to rapidly decrease the temperature inside the chamber, a cylinder of liquid can be connected the chamber
F. Energy-saving operation, the KM-5166 controller uses advanced control of an electronic expansion valve to save energy and improve control of the refrigeration system. Improvements in refrigeration and heater operation make the new generation of KOMEG environmental test chambers the most energy efficient ever.
|Minimum Order Qty:||1 units|
|Payment Terms:||T/T, negotiable|
|Warranty||12 months on parts (excluding the damages caused by the natural disasters, abnormal power, improper operation and maintenance, etc)|
|Delivery Time:||60 working days after received 60% deposit|
|Packaging Details:||Packed in carton firstly, and then reinforced with plywood case for outer packing|
Before the purchase, our company will provide customers with detailed product-related information, and welcome you to visit the company and check the goods.
After the completion of the transaction, our company will be arranged different after-sales service according to the ease of the goods , and even arrange work engineers on-site service.
Our product warranty is 12 months and we are committed to responding within 48 hours of the problem, providing a solution.
Thermal Shock Chambers Brochure-KOMEG.pdf
Contact Person: Anna Hu
Cable port: Φ50mm*1 located on each side of chamber, with rubber stopper and stainless steel cover
Humidity uniformity: 3.0％RH (no-load)
Interior Material: SUS 304
Ramping and soaking rate: Heating up rate: -20℃↑ +100℃ about 35min (no-load, ambient temperature +25℃) Cooling rate: 20 ℃to -20℃ about 45min (no-load, ambient temperature +25℃)