Payment & Shipping Terms:
|Product Name:||Repid Temp Change Chamber||Application:||Reliability Testing, Research & Development Testing, Failure Analysis|
|Working Chamber Volume:||1000L||Power Source:||AC380V|
|Cooling Mode:||Water Cooled||Compressor:||Semi-Hermetic Compressor|
|Heater:||Iron-chrome Wire Heater||Controllor:||Touch Screen Programmable Controllor|
environmental testing chambers,
Thermal Shock Test Chamber
Rapid changes in temperature Test Chamber(ESS Chamber)
This equipment is widely applied for electronic and electric products, components and materials by constant high low temperature, temperature change , rapid rate temperature change ,damp heat etc environmental simulation reliability test .
1) Inflammable, explosive, easy volatile specimen test and storage.
2) Corrosive material and biological specimen test and storage .
3)Strong electromagnetic source specimen test and storage.
2. Standard compliance
GB/T2423.1-2008(IEC60068-2-1:2007) Environmental testing - Part 2: Test methods - Tests A: Cold
GB/T2423.2-2008(IEC60068-2-2:2007) Environmental testing for electric and electronic products Test methods - Tests B:Dry Heat
GJB150.3-1986 High temperature test
|Working Chamber Volume(L)||1000L|
|Temp Rate of Change( ºC /Min)||15 ºC /Min|
|Temperature Range||-70 ºC～+100 ºC( Rapid Temp Change -55 ºC～+85 ºC Full Linear Control)|
|Humidity Constancy||±0.5 ºC|
|Temp Constancy||±3.0 ºC|
|Exterior Material||Cold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel|
|Interior Material||Stainless Steel Plate(SUS 304)|
|Insulation Material||Rigid Polyurethane Foam|
|Safety Devices||over pressure,over heat and over current protection for compressor, over temp. protection,|
|Cooling Mode||Water Cooled|
|Control system||Balanced Temperature & Humidity Control System(BTC type)|
|Heater||Iron-chrome wire heater|
|Observation Window||Glass incorporating heat generator|
|Controller||Touch screen programmable controller|
|Power||AC 380V/50Hz 3phase 5 wires+ Ground wire|
|Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available|
1.Graceful appearance, circularly shaped body, surface treated with mist strips, and plane handle with no reaction. Easy to operate, safe and reliable.
2. Rectangular viewing window for the observation of product under test, equipped with sweat-proof electrical heating device
that can prevent water steam from condensing into droplets, and with high brightness PL fluorescent bulbs to provide light inside the box.
3.Double-layer-insulated airtight doors, able to insulate the internal temperature effectively.
4.Water supply system that is externally connectable, convenient for refilling water into the humidifying pot and automatically recyclable.
5. French Tecumseh is used for the compressor circulation system, capable of removing the lubricant between the
condensation pipes and capillaries. environment friendly coolant is (R23,R404A)
6.LCD display screen is used for the control unit, capable of displaying the measured value as well as the set value and time.
7. The control unit has the functions of multiples segment program editing, and with temperature ramp
8. Casters for ease of mobility, with strong positioning screws.
Interior material: Stainless Steel Plate SUS304#
Exterior material: Baked Painting Steel Plate or Stainless Steel SUS304#
Insulation material: Rigid polyurethane Foam and Glass Fiber Wool
Contact Person: Peter Zhang