|
Product Details:
Payment & Shipping Terms:
|
| Interior Size: | W2500XH3000XD2000mm | Humidity Uniformity: | 3.0％RH (no-load) |
|---|---|---|---|
| Interior Material: | SUS 304 | Standard Accessories: | Sight Window*1, Cable Port ( PortΦ50mm ) *1, Chamber Lamp*1, Status Indicator |
| Accuracy: | Temp.:0.1% Of F.S ± 1 Digit Humidity:0.1% Of F.S ± 1 Digit | Packing: | PP Film Wrapping |
| High Light: | walk in environmental chamber,walk in humidity chamber |
||
Large Size Walk-In Chamber Full Color LCD Climate Humidity Temperature Testing Chamber
OEM &ODM are welcome ,more detail information ,pls kindly contact :anna@komegtech.com
| Model |
KMHW-
|
||||||
| 4 | 6 | 8 | 13 | 17 |
21
|
||
| Control system |
Balanced Temperature Control System (BTHC) to Control SSR by
P.I.D.
|
||||||
| Temperature range |
0℃,-20℃,-40℃-60℃～150℃
|
||||||
| Humidity range |
10% ,20% 30～95%R.H
|
||||||
| Temperature fluctuation |
±0.5℃
|
||||||
| Humidity fluctuation |
±2.5%R.H
|
||||||
| Temperature uniformity |
±2.0℃
|
||||||
| Humidity uniformity |
±5.0%R.H
|
||||||
| Temperature deviation |
±2.0℃
|
||||||
| Humidity deviation |
±3%R.H(≥75%R.H)/±5.0%R.H(＜75%R.H)
|
||||||
| Heating time |
20℃ to 80℃ within about 60 minutes
|
||||||
| Cooling time |
20℃～-70℃ Within about 75 minutes
|
||||||
| Interior size | W | 210 | 300 | 390 | 300 | 390 |
480
|
| H | 210 | 210 | 210 | 210 | 210 |
210
|
|
| D | 205 | 205 | 205 | 430 | 430 |
430
|
|
| Exterior size | W | 325 | 415 | 505 | 505 | 505 |
595
|
| H | 235 | 235 | 235 | 235 | 235 |
235
|
|
| D | 225 | 225 | 225 | 225 | 450 |
450
|
|
| Chamber structure |
The inner wall is made of imported high-density polyamines made from
imported special equipment to form a sandwich core insulation board
with a thickness of 100mm, which is assembled and installed on site.
The interior and exterior wall materials of the insulation board are
double-sided spray color plates of South Korea imported with a t
hickness of 1.0mm
Base with 2 inches of iron;
The inside surface of the library plate is made of thickened 1.2mm
color steel plate plus SUS203# stainless steel plate to reinforce and
wear, and the thickness is up to 3mm. |
||||||
| Insulation material |
Imported raw materials are high-pressure foamed with a density of
40Kg/m3 or more; |
||||||
| Floor loading |
600Kg/m2
|
||||||
| Door size |
Single Wing(80×180cm),Double wing(160×180),observation
window (40×25cm) |
||||||
| Refrigeration system |
Air-cooled/water-cooled
|
||||||
| Controller |
LCD color touch screen, Chinese/English display
|
||||||
| Protective device |
leakage circuit breaker, anti-locking door (can be opened both indoors
and outdoors), indoor emergency stop button control switch, "in the
room" status indicator light, equipment safety protection, safe and
reliable grounding protection device, three-phase power supply over-
voltage, under-voltage , phase loss, phase sequence protection, no
fuse switch, heater short circuit protection, blower motor overload
protection, chiller over pressure protection, refrigerator overload
protection, empty incineration protection device, ceramic fast fuse, line
fuse and full protection The sleeve terminals, buzzer and indicator light
provide sound and light alarm, and independent over-temperature
protection system (When the temperature of the laboratory exceeds
the set value, the heating power is cut off, and a sound and light alarm
issued)
|
||||||
| Use environment |
5℃～35℃,≤85%RH,86～106Kpa
|
||||||
| Power supply |
AC380±10% 50HZ three-phase four-wire + protection ground wire |
||||||
Contact Person: Anna Hu
Tel: +8618098282716
