Product Details:
Payment & Shipping Terms:
|
Temp. Range: | -60℃-120℃ | Humidity Range: | 20% ~98% RH |
---|---|---|---|
Temp Flucuation: | ±0.5 ºC | Exterior Material: | Baked Painting Steel |
Compressor: | Semi-Hermetic Compressor | Cooling Mode: | Water Cooled |
High Light: | walk in environmental chamber,walk in humidity chamber |
Application :
Walk in Chamber is mainly used for large-scale industrial equipment, automotive electronic products, etc. to put bulk products into a complex high-low temperature wet heat alternating test. Simulation of a high temperature, harsh environment testing equipment, is to improve product stability, reliability The important experimental equipment.
Technical specification
Model |
KMHW-4590
|
Volume |
4590L
|
Interior Dimensions |
W 1700 × H 1800 × D 1500 mm Exterior size: approx: W 2800 × H 2100 × D 1700 mm (Excluding the protruding part like motor,ect)
|
Door |
Single door, left open ,heating wire is installed at the door frames to prevent
condensation at low temperatures |
Safety Devices(standard) |
No fuse breaker, over pressure, over heat and over current protection for
compressor, over temperature protection, over load protection for blower, dry
heat protection |
Standard accessories |
φ100mm*1 located on the left and right of chamber, with rubber stopper and
stainless steel cover
|
Control System |
Balanced Temperature & Humidity Control System
|
Refrigeration system |
Water Cooled
Semi-hermetic compressor, single stage or cascade refrigeration system , CFC free refrigerant ( HFC-507 and HFC-23 ) |
Controller |
Panel: 7-inch LCD Touch panel, Chinese or English display selectable
Operation model : Program or fix point running
Memory capacity:120 programs,1200steps, all repeat 999 cycles,part repeat
99 cycles |
Temp. range |
Maximum: 80 ºC,120 ºC;
|
Humidity Range |
10%, 20%, 30% ~ 95%
|
Temp. constancy |
±0.5 ºC
|
Humidity constancy |
±2.5%R.H
|
Temp. uniformity |
±2.0 ºC
|
Humidity uniformity |
±5.0%R.H |
Shelf for samples |
Stainless steel sample holder 15 layers, carrying weight 30kg/layer.
|
4.Observation window | With Observation windows installed on the door, multi-hollow electric insulation coated glass prevent condensation effectively |
5.Lighting Device | LED Light device 1pcs,installed in the inspection window |
6.Heating |
High quality nickel-chromium alloy wire electric heaters, Non-contact control mode(SSR) |
7.Humidifier |
Basin heating and humidification method; Stainless steel armored heater; Heater control mode: Non-contact control mode (SSR); Water level control device, heater anti-drying device. |
8.Water outlet hole | Available for drain the condensate water |
9.Cable port | φ100mm*1 located on the left and right of chamber, with rubber stopper and stainless steel cover |
10.Shelf for samples | Stainless steel sample holder 15 layers, carrying weight 30kg/layer. |
11.Mobile Casters | Mobile Casters with foot cups |
12.Electric control box | Total power circuit breaker, over-temperature protection. |
13.Water supply system | The pump boosts automatic water supply. |
Ⅵ. Cooling System | |
1. Working mode | Mechanical compression refrigeration |
2.Compressor | Europe and the United States imported Taikang full-density compressors. |
3.Evaporator | Fin-type multi-stage automatic load capacity adjustment, No frost in long-term use of low temperature and humidity conditions |
4. Condenser | Shell and Tube condenser(air-cooled) |
5. Refrigerant | Environmental-friendly refrigerant: R404A,R23 |
6. Other accessories | Use internationally-known brand, such as high precise expansion valve, oil extractor, dryer and many other accessories. |
7.Refrigerant flow control | Adjust energy consumption output and control automatically to the refrigeration system. |
8.Refrigeration Technology |
※ Nitrogen welding, two-stage rotary vane vacuum pump, ensure that the internal cooling system clean and reliable. ※water tray located at the bottom of the compressor to ensure condensate water drain through pipe freely at the rear of the chamber. |
Features 1:
Control method and characteristics:
Precision microcomputer control temperature and humidity system, with PID control the refrigerant flow to make the system’s heating / humidification reduction, to achieve low power consumption, energy saving, carbon reduction effect, cooling, heating, humidity control intelligent electronic control, long-term stable use.
Features 2:
Heat preservation material, we use high-intensity PU foam with flame retardant material and high density glass fiber cotton, which can assure high precise and better uniformity and avoid unnecessary energy loss. Meanwhile, our design can better assure personnel safety when operating a Walk-in Chamber.
2. Large glass window design, viewing angle in all directions, hollow electric plating film and anti-condensation design; built-in LED lights to facilitate the test sample state of real-time observation in the course of testing; double door design, the inner big glass door with hand-in holes for the convenient operating.
3. Material quality of inner box is SUS304 # mounted stainless steel imported, and outer box is steel plate and the paint process applies automobile coating technology. Box body is processed shape using Triumph processing machine, its shape is nice and neat.
4. Large-size Full Color LCD touchscreen displayer, simple operation, easy to edit programs. PID with automatic calculation function; self-diagnostic function, show failure message and failure shot solutions step by step.
5. An RS-232 and RS-485 communication interface, matching recorder, strong expandability. We also support remote control by PC via wifi or wire (recommended).
6. Standard Met and Implemented:
GB/Bb T2423.2-89 high temperature test method
GB2423.1-89 test A: low temperature test method 6
GJB150.4-1986 test at low temperature
IEC60068-2-1 low temperature test method
IEC60068-2-38 temperature cycle
IEC60068-2-78 constant humidity temperature
Photos show
Contact Person: Anna Hu
Tel: +8618098282716