|
Product Details:
Payment & Shipping Terms:
|
| Temp Range: | -20℃ ～ +150℃ | Humidity Range: | Environmental Test Chamber |
|---|---|---|---|
| Interior Material: | SUS 304 | Exterior Material: | Baked Painting Steel |
| Compressor: | Semi-Hermetic Compressor | Cooling Mode: | Water Cooled |
| High Light: | thermal shock chamber,environmental testing chambers |
||
Vertical Thermal Shock Chamber With Separate Hot And Cold Temperature Zones
Application
Traditional three-zone thermal shock chambers can be quite large, as three separate chambers are used. It
has just one chamber, substantially reducing its size. Instead, it circulates cold, hot, or ambient air as
needed. Conditioned air is pre-cooled or pre-heated beyond the setpoint, allowing quicker recovery of the
desired condition after transfer.
Technical Specification
|
2,Performance:( Water-cooled, water temperature is +25 ° C, no load)
|
|
| 2.1 Low temperature shock range |
-70℃～-10℃
|
| 2.2High temperature shock range |
+60～+200℃
|
| 2.3 Shock range |
High temperature:+60～+150℃ ;Low temperature: -50℃～-10℃
|
| 2.4 Temperature stability |
±0.5℃
|
| 2.5 Temp. Uniformity |
±2.0℃
|
| 2.6 Temperature steady time |
-50℃~150℃ about 5min,With load 10KG plastic IC,, High
temperature and low temperature steady for each 30 min(sensor
placed in the unit outlet) |
|
Ⅲ. Structure Features
|
|
| 3.1 Workspace volume |
W 700 × H 600 × D 600 mm
|
| 3.2 Exterior size |
Approx W 1750 × H1960 × D 2000 mm
|
| 3.3 Inner material |
Stainless steel (SUS #304)
|
| 3.4 Exterior material |
high-quality carbon steel
|
| 3.5 Insulation materials: |
High temperature zone:24k glass foam
Low temperature zone:PU polyurethane foam+glass foam
|
| 3.6 Heater |
Bare wire heater
|
| 3.7 Air circulation system |
a. TECO motor
b. stainless steel extended shaft
c. Multi-blade fan blade (SIROCCO FAN) |
| 3.8 Door |
Single door
a. flat embedded handle
b. Rear button: SUS #304
c. silicone foam strip |
Features
● GB-2423.1-2008 (IEC68-2-1)Test A: Low Temperature Test
● GB-2423.2-2008(IEC68-2-2)Test B: High Temperature Test
● GJB360.8-2009(MIL-STD.202F) High Temperature Life Test
● GJBl50.3-2009(MIL-STD-810D) High Temperature Test
● GJBl50.4-2009 (MIL-STD-810D) Low Temperature Test
● GB2423.3-2008(IEC68-2-3)Test Ca: Constant Heat Test
● GB2423.4-2008(IEC68-2—30) Test Db: Damp Heat Alternative Test
● GJBl50.9-2009 (MIL-STD-810D) Damp Heat Test
Photos show
Contact Person: Anna Hu
Tel: +8618098282716
